Ryobi Outdoor RY80030, 3000 PSI Adding OIL to the Engine, Adding Gasoline to the Fuel Tank, Slot

Page 11

ASSEMBLY

ADDING OIL TO THE ENGINE

See Figure 7.

NOTE: This machine has been shipped with approximately 2 oz. of oil in the enginge from testing. You must add oil to the engine before starting it the first time.

CAUTION:

Any attempt to start the engine without adding oil will result in engine failure.

nPlace pressure washer on a flat, level surface.

nUnscrew the oil cap / dipstick by turning counterclock- wise.

nUsing 4-stroke engine oil (10W-30), fill to the upper level of the oil filter neck (18 oz., 4-cycle engine oil provided).

nReplace the oil cap / dipstick and securely tighten.

NOTE: This engine has an oil capacity of 20 oz. (or .6 liters).

ADDING GASOLINE TO THE FUEL TANK

See Figure 8.

WARNING:

Gasoline and its vapors are highly flammable and explosive. To prevent serious personal injury and prop- erty damage, handle gasoline with care. Keep away from ignition sources, handle outdoors only, do not smoke while adding fuel, and wipe up spills immediately.

When adding gas to the pressure washer, make sure the unit is sitting on a flat, level surface and that the engine is not hot. If the engine is hot, let the pressure washer cool before adding gas. ALWAYS fill the fuel tank outdoors.

n Make sure the ON/OFF switch is in the OFF ( O ) position.

nClose the fuel valve before filling the fuel tank.

nBefore removing the fuel cap, clean the area around it. Remove the fuel cap.

nInsert a clean funnel into the fuel tank.

nSlowly pour gasoline into the fuel tank (always use the fuel filter screen when filling the fuel tank). Wipe any spilled fuel off the machine before starting.

NOTE: Do not fill above the top of the fuel filter screen or the gas may overflow when it heats up later and expands.

nReplace fuel cap and securely tighten.

nClean up any spills before starting the engine.

SLOT

CLEAR INJECTION

HOSE

BARBED

FITTING

Fig. 6

OIL CAP / DIPSTICK

UPPER LEVEL OF

OIL FILTER NECK

Fig. 7

FUEL

CAP

FUNNEL

Fig. 8

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions Before Using this Product Important Safety InstructionsSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsService ON/OFF Switch Fuel Tank Product SpecificationsNozzle Cleaning Tool Trigger with Lock OUT Spray Wand Accessories Storage Moving Handle High Pressure Hose ChokeFeatures Packing List AssemblyAttaching the Wheel Assembly UnpackingAttaching Injection Hose Connecting High Pressure Hose to Spray Wand AssemblyAttaching the Resting Foot Assembling the Spray WandSlot Adding OIL to the EngineAdding Gasoline to the Fuel Tank High Pressure Hose Connecting the High Pressure Hose to PumpConnecting the Garden Hose to Pressure Washer OperationSTARTING/STOPPING the Pressure Washer Switch Choke Closed Fuel ValveOFF Position Choke ON/OFF Opened Switch ApplicationsNozzle Spray Wand Trigger Collar Using the Spray Wand TriggerSelecting the Right QUICK-CONNECT Nozzle for the JOB Slot Lock OUTRinsing with the Pressure Washer Moving the Pressure WasherStoring the Pressure Washer Washing with DetergentCleaning the AIR Filter MaintenanceGeneral Maintenance Changing the OIL Cleaning Fuel CUPNozzle Maintenance Pump MaintenancePreparing for USE After Storage Periodic Maintenance Schedule TableProblem Cause Solution TroubleshootingPage Warranty Commencement Date Procedure Interval Warranty Periods Limited ROBIN/SUBARU Engine WarrantyLimited NON-ENGINE Warranty Statement Service Model NO. and Serial no

RY80030, 3000 PSI specifications

The Ryobi Outdoor RY80030 is an impressive pressure washer designed for homeowners and outdoor enthusiasts seeking to tackle various cleaning tasks with efficiency and power. Featuring a robust 3000 PSI, this pressure washer delivers serious cleaning capability, making it ideal for washing driveways, patios, decks, and vehicles. With its powerful electric motor, it can generate high pressure to effectively remove dirt, grime, and stains, ensuring a pristine appearance for your outdoor spaces.

One of the main features of the RY80030 is its 2.3 GPM (gallons per minute) flow rate, which complements the high PSI to enhance cleaning effectiveness. This combination allows users to clean large areas quickly without sacrificing performance. The unit is equipped with an adjustable spray nozzle that offers multiple spray patterns, giving users the flexibility to choose the right setting for the task at hand, whether it’s a concentrated stream for tough stains or a wider spray for delicate surfaces.

This pressure washer is also equipped with durable, solid rubber wheels that provide excellent mobility. It allows for easy maneuvering across various terrains, making it user-friendly and practical for outdoor cleaning tasks. The foldable handle adds to its storage convenience, allowing for easy transport and compact storage when not in use.

In terms of design, the Ryobi RY80030 features a sturdy, reliable frame made from high-quality materials, ensuring durability and longevity. It comes with integrated storage for nozzles and other accessories, keeping everything organized and within reach. The quick-connect nozzles are easy to change, enabling users to switch tasks swiftly without fuss.

One notable technology included in the RY80030 is the pressure-activated soap applicator that allows for the application of detergent while rinsing. This enhances the cleaning process, especially on stubborn stains, and makes the unit versatile for various cleaning applications.

Overall, the Ryobi Outdoor RY80030 sets itself apart with its high-performance capabilities, user-friendly design, and advanced features that make it a reliable choice for anyone looking to maintain their outdoor spaces efficiently. Whether it’s for regular maintenance or tackling a challenging cleaning job, this pressure washer proves to be a valuable addition to any homeowner’s toolkit.
Top Page Image Contents