Ryobi Outdoor PBC3046E, RY70105 manual Attaching the Shoulder Strap, Silencer Guard

Page 9

ATTACHING THE SHOULDER STRAP

1.Connect the latch on the shoulder strap to the strap hanger.

2.Adjust the strap to a comfortable position.

NOTE: To quickly release the product from the shoulder strap, sharply pull the quick release tab

SHOULDER

REAR HOUSING

TORQUE

WRENCH

SCREWS

SILENCER

GUARD

QUICK

STRAP

RELEASE

TAB

LATCH

BENT END OF

SILENCER GUARD

OPENING IN REAR

HOUSING

Fig. 6

STRAP HANGER

Fig. 5

1.Remove silencer guard and two screws from the owner’s kit.

2.Attach the silencer guard to the rear housing.

NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.

3.Using the torque wrench supplied, install the two screws and tighten securely.

NOTE: When converting from brushcutter to trimmer, or trimmer to brushcutter, make sure the correct guard/ deflector is being used. See Figure 7.

GRASS DEFLECTOR FOR

TRIMMER USE

BLADE GUARD FOR

BRUSHCUTTER USE

Fig. 7

Image 9

Contents OPERATOR’S Manual Safety Table of ContentsSpecific Safety Rules for Brushcutter and Blade USE Specific Safety Rules for Trimmer USESymbol Name Explanation SymbolsVibration level racing Technical DataUnpacking FeaturesInstructions Packing List for OWNER’S KITAttaching the Power Head to the Trimmer Attachment AssemblyRemoving the Attachment from the Power Head Attaching the Storage HangerAttaching the Handle Silencer Guard Attaching the Shoulder StrapBlade Guard Drive Connector Spool RetainerGrass Deflector Converting from Trimmer to BrushcutterInstalling the String Head Installing the BladeConverting from Brushcutter to Trimmer Removing the BladeOperation Fuel and RefuellingOperating the Trimmer Advancing the String Cutting TipsGrass Deflector Line Trimming CUT- OFF Blade Operating the Brushcutter TRI-ARC BladeCutting Technique Blade Starting and Stopping Ignition SwitchTo Start a Cold Engine To Start a Warm EngineSpool Replacement EZ Line TAP Advance System MaintenanceNEW PRE-WOUND Spool See Figures 18Blade Protector Replacing and Cleaning AIR Filter Cleaning the Exhaust Port and SilencerSpark Arrester See Figures 25Fuel CAP Sparking PlugStorage 1 Month or Longer Troubleshooting Idle Speed Screw Needle Safety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noPage Ryobi Technologies GmbH