Patriot Products 1900 instruction manual Attaching the BAR & Chain If not

Page 6

NOTE: If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula- tions for Commercial Logging.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your Authorized Service Dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., in accordance with:

ANSI B175.1-2000American National Standards for Gasoline--Powered Chain Saws -- Safety Requirements

CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is properly assembled and all fasteners are secure. Al- ways wear gloves when handling the chain.

6

The chain is sharp and can cut you even when it is not moving!

SLoosen and remove the chain brake nuts

and the chain brake from the saw.

S Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

SAn adjusting pin and screw is used to adjust the tension of the chain. It is very important when assembling the bar, that the pin located on the adjusting screw aligns into a hole in the bar. Turning the screw will move the ad- justment pin up and down the screw. Locate this adjustment before you begin mounting the bar onto the saw. See illustration below.

Inside view of

Chain Brake

Adjustment located on Chain Brake

STurn the adjusting screw by hand counter- clockwise until the adjusting pin just

touches the stop. This should allow the pin to be near the correct position.

S Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Mount the Bar

SCarefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting or operating the chain sawHandle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Kickback Safety FeaturesReduce the Chance Kickback Avoid Obstructions Clear The Working AreaSume That the Chain Brake will Chain Brake and CKA AngleResent and YOU should not AS Protect YOU in the Event of aInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension Fit bottom of drive links between the teethThrottle Trigger ON/STOP SwitchKnow Your Chain SAW Throttle LOCK-OUTFueling Engine BAR and Chain LubricationImportant Points to Remember Braking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlTree Felling Techniques Felling Large Trees Notch CUT and Felling the TreeFooting Types of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing and Pruning Important Points Cleaning the air filterPruning LimbingBAR Maintenance Cleaning the Spark ARREST- ING ScreenCarburetor Adjustments Inspect Muffler and Spark Arresting ScreenTroubleshooting Table Cause Remedy StorageContact your dealer or place of purchase Ligations The U. S. EnvironmentalEater service centers. call 1--800--554--6723MAINTENANCE, RE Weed Eater servicing center. Conse

1900 specifications

Patriot Products 1900 is a compact and efficient wood chipper designed specifically for home landscaping and yard maintenance. Ideal for homeowners with small to medium-sized properties, this unit stands out for its powerful performance and user-friendly features, making it a popular choice among DIY enthusiasts and professional landscapers alike.

One of the main features of the Patriot Products 1900 is its robust engine. Powered by a reliable 14 HP Honda engine, it offers exceptional torque and speed, allowing for the chipping of branches up to 2 inches in diameter with ease. The engine is designed for optimal fuel efficiency and minimal emissions, aligning with environmentally conscious practices.

The chipper’s design incorporates a unique feed system that enhances productivity. It features a large, oversized hopper that allows users to easily feed branches and yard debris into the machine. This design minimizes the risk of clogging, which is a common issue in smaller chippers. The oversized blades are constructed from high-quality steel, ensuring longevity and sharpness for consistent performance.

Another significant characteristic of the Patriot Products 1900 is its portability. With a sturdy steel frame and 10-inch pneumatic wheels, this chipper is easy to maneuver across various terrains. It can be effortlessly transported from one location to another, making it an excellent choice for individuals who need to perform yard work in different areas.

Safety is a top priority in the design of the Patriot Products 1900. It is equipped with several safety features, including a safety shut-off switch and a protective housing, to prevent accidental injuries during operation. Users can operate the chipper with confidence knowing that their safety is safeguarded.

In terms of maintenance, the Patriot Products 1900 is straightforward. It comes with a simple user manual and guidelines for routine checks and upkeep. This ensures that users can keep the machine in top condition without excessive hassle.

Overall, the Patriot Products 1900 boasts a winning combination of power, efficiency, portability, and safety. Whether tackling yard clean-up tasks, preparing mulch for gardens, or managing storm debris, this wood chipper is designed to make the job easier and more efficient for all users. Its advanced features and thoughtful design set it apart as a reliable tool in the realm of landscaping equipment.
Top Page Image Contents