Patriot Products 1900 instruction manual Cutting a Fallen Tree, Types of Cutting Used for Bucking

Page 12

S DO NOT cut down a partially fallen tree with your saw. Be extremely cautious with partially fallen trees that may be poorly supported. When a tree doesn’t fall com- pletely, set the saw aside and pull down the tree with a cable winch, block and tackle, or tractor.

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the desired log size.

WARNING: Do not stand on the log being cut. Any portion can roll causing loss of footing and control. Do not stand downhill of the log being cut.

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper-

ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg

or foot.

S Do not cut in an area where logs, limbs, and roots are tangled such as in a blown down area. Drag the logs into a clear area before cutting by pulling out exposed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Re- start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pres- sure.

Overcutting

Undercutting

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres-

sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR

SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your

first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting or operating the chain sawOperate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance KickbackMaintain Control Avoid Obstructions Clear The Working AreaChain Brake and CKA Angle Resent and YOU should not ASSume That the Chain Brake will Protect YOU in the Event of aInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notAdjusting the tension Chain TensionChecking the tension Fit bottom of drive links between the teethON/STOP Switch Know Your Chain SAWThrottle Trigger Throttle LOCK-OUTFueling Engine BAR and Chain LubricationImportant Points to Remember Starting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Felling Large Trees Notch CUT and Felling the TreeFooting Bucking Using a LOG or Support Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportCleaning the air filter PruningLimbing and Pruning Important Points LimbingCleaning the Spark ARREST- ING Screen Carburetor AdjustmentsBAR Maintenance Inspect Muffler and Spark Arresting ScreenTroubleshooting Table Cause Remedy StorageContact your dealer or place of purchase Ligations The U. S. EnvironmentalEater service centers. call 1--800--554--6723MAINTENANCE, RE Weed Eater servicing center. Conse

1900 specifications

Patriot Products 1900 is a compact and efficient wood chipper designed specifically for home landscaping and yard maintenance. Ideal for homeowners with small to medium-sized properties, this unit stands out for its powerful performance and user-friendly features, making it a popular choice among DIY enthusiasts and professional landscapers alike.

One of the main features of the Patriot Products 1900 is its robust engine. Powered by a reliable 14 HP Honda engine, it offers exceptional torque and speed, allowing for the chipping of branches up to 2 inches in diameter with ease. The engine is designed for optimal fuel efficiency and minimal emissions, aligning with environmentally conscious practices.

The chipper’s design incorporates a unique feed system that enhances productivity. It features a large, oversized hopper that allows users to easily feed branches and yard debris into the machine. This design minimizes the risk of clogging, which is a common issue in smaller chippers. The oversized blades are constructed from high-quality steel, ensuring longevity and sharpness for consistent performance.

Another significant characteristic of the Patriot Products 1900 is its portability. With a sturdy steel frame and 10-inch pneumatic wheels, this chipper is easy to maneuver across various terrains. It can be effortlessly transported from one location to another, making it an excellent choice for individuals who need to perform yard work in different areas.

Safety is a top priority in the design of the Patriot Products 1900. It is equipped with several safety features, including a safety shut-off switch and a protective housing, to prevent accidental injuries during operation. Users can operate the chipper with confidence knowing that their safety is safeguarded.

In terms of maintenance, the Patriot Products 1900 is straightforward. It comes with a simple user manual and guidelines for routine checks and upkeep. This ensures that users can keep the machine in top condition without excessive hassle.

Overall, the Patriot Products 1900 boasts a winning combination of power, efficiency, portability, and safety. Whether tackling yard clean-up tasks, preparing mulch for gardens, or managing storm debris, this wood chipper is designed to make the job easier and more efficient for all users. Its advanced features and thoughtful design set it apart as a reliable tool in the realm of landscaping equipment.
Top Page Image Contents