Polaris P3000iE manual DC Operation, Connecting the Battery Charging Cable

Page 38
Disconnecting the Battery Charging Cable
5A Fuse
Access
Door

OPERATION

Safe Operating Precautions

DC Operation

Connecting the Battery Charging Cable

Do not start the vehicle while the battery charging cable is connected and the generator is running. The vehicle’s charging system or the generator may be damaged.

Note: The DC receptacle is protected from an overload with a fuse. If the DC circuit is overloaded, the 5 amp fuse will blow and power to the DC receptacle will cease. The red light on the DC panel will illuminate. If the DC overload fuse continues to blow, discontinue charging and see your authorized POLARIS generator supplier. The overload fuse does not prevent overcharging the battery. The fuse is located to the left of the receptacle and is accessed by snapping open the access door. Replace the fuse with one of the same capacity. Using a higher rated fuse may cause damage to the generator alternator.

Disconnecting the Battery Charging Cable

1.Stop the generator.

2.Disconnect the black lead of the battery charging cable from the negative (-) battery terminal and then the lead from the positive (+) battery terminal.

3.Unplug the battery charging cable from the DC receptacle.

4.Connect the vehicle battery ground cable to the negative (-) battery terminal.

37

Image 38
Contents DEATH POLARIS POWER P3000iEOperator’s Manual Australian model TABLE OF CONTENTS INTRODUCTION WelcomeSafety Precautions Intended UseALCOHOL OR DRUG USE Signal Words and Safety TermsWarnings, Cautions and Notices Identification Numbers and Locations Serial NumberGeneral SAFETYSafety Warnings and Precautions Before and During Operation Do not refuel while engine is running Operator Safety Fuel Safety Carbon Monoxide Safety Electrical Safety Fire SafetyExtension Cord Information Equipment ModificationsDANGER Carbon Monoxide WarningOutdoor Use ONLY Danger Label Hot Exhaust CautionSAFETY NOMENCLATURE CONTROLS AND FEATURESGenerator Components DESCRIPTIONGround Terminal Overload Indicator Indicator PanelLow Oil Indicator Output IndicatorFuel Valve Lever SMART Throttle SwitchIgnition Switch DC Receptacle and Fuse AC ReceptaclesStarter Recoil Grip Fuel Volume IndicatorGround Terminal FIRST USE INSTRUCTIONS Adding Engine OilFuel Recommendation Adding Fuel Locking swivel wheel Wheel Kit InstallationWheel assembly Fuel Line PRE-OPERATIONINSPECTIONEngine Oil Fuel LevelFuel Recommendations OPERATIONSafe Operating Precautions Refueling1.Remove the fuel tank cap A Before Starting the Engine Starting the Engine6. To start the generator using the ignition Stopping the Engine AC Operation AC Capacity ADDITIONAL Wattage Reference TableRUNNING DEVICEDC Operation Power ManagementConnecting the Battery Charging Cable included Connecting the Battery Charging Cable Disconnecting the Battery Charging Cable Air Conditioning Operation SMART Throttle SystemSystem Ground Standby PowerConnections to a Building Electrical System System RequirementsHigh Altitude Use Carburetor ModificationAlterations Emission Control System InformationSource of Emissions Problems Affecting Emissions Replacement PartsMAINTENANCE Importance of MaintenanceMaintenance Safety Safety PrecautionsPeriodic Maintenance Periodic Maintenance ChartOpening the Service Door Fuel System Fuel Line InspectionFuel Tank Strainer Oil Level Inspection Engine OilOil Recommendation Oil Change 7.Re-installthe oil drain bolt B Air Filters Air Filter InspectionSpark Plug Inspection and Replacement Spark Plug8.Using a wire-typefeeler gauge Accessing the Battery BatteryBattery Safety Battery CleaningSTATE OF Battery Charging Sealed OnlyCHARGE TIME VOLTAGESpark Arrestor Maintenance Spark ArrestorTransporting the Generator TRANSPORTATION AND STORAGETransportation Storage Storage PreparationAccessing the Fuel Tank Draining Fuel from the Fuel Tank and Carburetor Fogging the Engine Generator Exercise Battery StorageStorage Precautions Removing from StorageP3000iE SPECIFICATIONSPOLARIS Power Generator ALTERNATORENGINE OIL P3000iE POLARIS Power GeneratorGENERATOR GREASE / SPECIALIZED LUBRICANTSDIAGRAMWIRING Inverter ModuleEngine Will Not Turn Over TROUBLESHOOTINGSOLUTION Engine Turns Over, but Will Not StartEngine Lacks Power Engine BackfiresEngine Pings or Knocks Engine Runs Irregularly, Stalls, or MisfiresFUEL CAUSE No Power at DC ReceptaclePOSSIBLE LEAN POSSIBLE RICHNo Power at AC Receptacles Engine Stops or Loses PowerWARRANTY REGISTRATION FORM WARRANTYABOUT THIS WARRANTY DOCUMENT POLARIS POWER GENERATOR WARRANTYWarranty repairs WARRANTY PERIODTRANSFER OF WARRANTY Warranty Period for consumer use 3 yearsWARRANTY EXCLUSIONS POLARIS POWER GENERATOR OWNER RESPONSIBILITY IMPORTANT NOTICE DATE/HOURS MAINTENANCE LOGSERVICE COMMENTSINDEX INDEX
Related manuals
Manual 1 pages 40.65 Kb Manual 1 pages 41.73 Kb

P3000iE specifications

The Polaris P3000iE is a robust and innovative inverter generator designed to deliver reliable power for various applications, whether for outdoor adventures or emergency backup. Renowned for its portability and efficiency, the P3000iE is an excellent choice for users who require a balance between power output and convenience.

One of the standout features of the Polaris P3000iE is its impressive 3000-watt output, which makes it suitable for powering a wide range of devices. From camping equipment such as portable refrigerators and lighting systems to tools and household appliances during power outages, the P3000iE meets diverse energy needs with ease. This generator is equipped with a powerful and fuel-efficient engine that ensures an extended runtime, often exceeding 10 hours on a single tank of gas.

The generator incorporates advanced inverter technology, enabling it to produce clean and stable power free from voltage spikes and surges. This makes it ideal for sensitive electronics, including laptops, smartphones, and entertainment systems, ensuring their safety during operation. The P3000iE's quiet operation, typically rated at only 58 decibels, allows users to enjoy a peaceful environment, a critical feature for camping trips or during night-time use.

Portability is another defining characteristic of the Polaris P3000iE. Weighing just over 60 pounds, it features a compact design with integrated wheels and a telescoping handle for easy transportation. The generator is user-friendly, equipped with a digital display that provides real-time information on power output, fuel level, and operational status, enhancing the overall user experience.

Furthermore, the P3000iE is designed with several safety features, including overload protection and low oil shutdown, ensuring that the generator operates securely and prolonging its lifespan. It also comes with multiple outlets, including standard 120V receptacles and USB ports, allowing for versatile connectivity options.

In summary, the Polaris P3000iE stands out as a high-performance inverter generator that excels in providing reliable, clean, and quiet power. With its advanced technologies, portable design, and user-friendly features, it caters to the needs of outdoor enthusiasts, homeowners, and professionals alike, making it a valuable addition to any power solution toolkit.