Porter-Cable T550 Maintenance, Customer Responsibilities Table, General Recommendations

Page 13

MAINTENANCE

CUSTOMER RESPONSIBILITIES TABLE

Before each

Every 25

Every 50

Every 100

use

Hours of Every

Hours of Every

Hours of Every

 

Season

Season

Season

MAINTENANCE TASK

 

 

 

 

 

Check oil level

X

See Note 2

Change oil

 

See Note 1

 

 

 

Clean Air Filter Assembly

 

X

 

 

Check Spark Plug

 

X

Prepare Unit for Storage

Prepare unit for storage if it is to remain idle for more than 30 days.

Note 1: Change oil after first two (2) operating hours and every 50 operating hours thereafter, more often if operated in extreme dusty or dirty conditions.

Note 2: Check oil after 5 hours of operation

GENERAL RECOMMENDATIONS

The warranty of the generator does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain the generator as instructed in this manual.

ENGINE MAINTENANCE

Refer to the Engine Operator's manual for service and maintenance of the engine.

GENERATOR MAINTENANCE

Your generator should be kept clean and dry at all times. The generator should not be stored or operated in environments that includes excessive moisture, dust or any corrosive vapors. If these substances are on the generator, clean with a cloth or soft bristle brush. Do not use a garden hose or anything with water pressure to clean the generator. Water may enter the cooling air slots and could possibly damage the rotor, stator and the internal windings of the generator head.

MONTHLY: For maximum protection against electrical shock the GFCI should be tested monthly.

To test:

1.Depress the TEST button. The RESET button should extend. If the RESET button does not extend, notify a Porter-Cable Authorized Service Center.

2.To restore power, depress the RESET button firmly into the GFCI unit until an audible click is heard. If reset properly, the RESET button is flush with the surface of the test button. When the button stays in, the power is ON.

13 — ENG

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Instruction Manual Generator T550 SpecificationThis Warranty is not Transferable and does not Cover WarrantyImportant Safety Instructions Safety Guidelines DefinitionsHazard What could Happen HOW to Prevent IT Risk of Electrocution and FireWet, icy, or flooded conditions Operation of generator in rainDo not Operate Unit Risk of FireDoors or in ANY Confined AreaRisk of Breathing Inhalation Hazard Listed voltage surge protec Risk of Unsafe OperationGenerator Risk of Moving Parts Risk of HOT SurfacesRisk from Lifting Remove Generator from Carton AssemblyGrounding the Generator Obtaining Electricity from the GeneratorOperation Stopping Engine Connecting Electrical LoadsEngine Maintenance MaintenanceGenerator Maintenance Customer Responsibilities TableEngine Preparation StorageGenerator Running Watts Starting Watts Wattage CalculationsVolts X Amp = Watts Volts x 10 amps = 1200 watts Starting Wattage RequirementsAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorProblem Cause Correction Troubleshooting GuideENG Generator Quick Facts

T550 specifications

The Porter-Cable T550 is a versatile and powerful tool designed for both professional and DIY users. Known for its robust performance and durability, the T550 stands out in the realm of pneumatic brad nailers. This tool is crafted to handle a variety of fastening tasks, making it an excellent choice for carpenters, woodworkers, and hobbyists alike.

One of the primary features of the Porter-Cable T550 is its lightweight and compact design. Weighing in at just over three pounds, it is easy to maneuver, reducing user fatigue during extended use. The design is also optimized for balance, ensuring that users can work efficiently in tight spaces or overhead applications without straining.

The T550 is equipped with a powerful engine that delivers consistent performance, allowing it to handle a wide range of materials, from softwoods to harder species. It fires 18-gauge brad nails ranging from 1 to 2 inches in length, providing flexibility for various projects. The tool's quick-release nose also simplifies jam clearing, ensuring minimal downtime and uninterrupted workflow.

Another noteworthy aspect of the Porter-Cable T550 is its adjustable depth control. This feature allows users to set the precise depth of each nail for perfect placement, ensuring that nails are set flush with the surface of the material. This is particularly beneficial for projects that require a neat finish, as it prevents any damage to the workpiece or visible nail heads.

The T550 is designed with an integrated air filter, which helps to keep dust and debris from entering the mechanism. This ensures long-term reliability and reduces maintenance needs. Additionally, its 360-degree exhaust port is adjustable, directing exhaust away from the user and the workpiece to maintain a clean working environment.

Safety is a key consideration in the design of the Porter-Cable T550. It features a sequential firing mechanism that prevents accidental firing, providing users peace of mind. Coupled with its non-marring nose tip, the tool minimizes the risk of damage to the work surface.

In summary, the Porter-Cable T550 brad nailer combines lightweight design, robust performance, and user-friendly features, making it a standout choice for anyone in need of a reliable fastening tool. Whether tackling home improvement projects or professional-grade carpentry, the T550 delivers precision and efficiency.
Top Page Image Contents