Porter-Cable D25804-025-1, PCH2600C instruction manual To USE Wand

Page 10

TO USE WAND

Your pressure washer is equipped with five spray nozzles. Each nozzle is color coded and delivers a specific spray pattern for a particular cleaning purpose. The size of the nozzle determines the size of the fan spray and the pressure out of the nozzle. The 0º, 15º , 25º, and 40º nozzles are high pressure nozzles. The chemical nozzle is a low pressure nozzle.

The nozzles are housed in receptacles on the panel of the pressure washer handle. Colors on the panel identify nozzle location and spray pattern.

Risk of injection or injury to person. Do not direct discharge stream toward persons, unprotected skin, eyes, or any pets

or animals. Serious injury can occur.

Changing Nozzles

DO NOT attempt to change nozzles while pressure washer is running.

Turn engine off before changing nozzles.

1.Pull quick connect coupler back and insert nozzle.

2.Release quick connect coupler and twist nozzle to make sure it is secure in coupler.

Risk Of Injury. Ensure nozzle is completely inserted in QC socket, and

QC snap ring is fully engaged (forward) before squeezing gun trigger.

0º nozzle - Red. This nozzle delivers a pinpoint stream and is extremely powerful. It covers a very small area of cleaning. This nozzle should only be used on surfaces that can withstand this high pressure such as metal or concrete. Do not use on wood.

15º nozzle - Yellow. This nozzle delivers a powerful 15 degree spray pattern for intense cleaning of small areas. This nozzle should only be used on areas that can withstand the high pressure from this nozzle.

25º nozzle - Green. This nozzle delivers a 25 degree spray pattern for intense cleaning of larger areas. This nozzle should only be used on areas that can withstand the pressure from this nozzle.

40º nozzle - White. This nozzle delivers a 40 degree spray pattern and a less powerful stream of water. It covers a wide area of cleaning. This nozzle should be used for most general cleaning jobs.

Chemical nozzle - Black. This nozzle is used to apply chemicals or cleaning solutions. It has the least powerful stream.

D25804

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Operation Pressure WasherBasic Elements of Engine HOW to USETo Adjust Pressure Pressure Washer TerminologyTo USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting located To Shut Down StartingTurn water source on. Note Make sure water Engine MaintenancePump HOW to Clean the Water Inlet Filter WandEngine Pump Reconnect spark plug wireStorage Windshield washer fluid may also be usedProblem Trouble Shooting GuideCausecorrection Problem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25804 Quick Facts Call
Top Page Image Contents