Porter-Cable PCH2600C, D25804-025-1 instruction manual Assembly

Page 7

ASSEMBLY

1.Place handle assembly onto frame and connect handle to frame.

2.Connect wand to gun. Tighten securely.

3.Attach high pressure hose to gun. Tighten securely.

5.Assemble grommet kit and quick-connect nozzles as described in instructions supplied.

6.Add engine oil (supplied) to engine. Refer to engine manual supplied by

engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information.

7- ENG

D25804

Image 7

Contents Instruction General Information Important Safety Instructions Safety Guidelines / DefinitionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Pressure Washer OperationPressure Washer Terminology HOW to USETo Adjust Pressure Basic Elements of EngineTo USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting located To Shut Down StartingTurn water source on. Note Make sure water Engine MaintenancePump Wand HOW to Clean the Water Inlet FilterWindshield washer fluid may also be used Reconnect spark plug wireStorage Engine PumpProblem Trouble Shooting GuideCausecorrection Chemicals Problem Cause CorrectionResponsibility of Original Purchaser initial User Limited WarrantyENG D25804 Call Quick Facts