Porter-Cable D25805-025-1, PCH3500C Starting, To Shut Down, Release trigger to stop water flow

Page 12

TO SHUT DOWN

IMPORTANT: Read and understand how to shut down the pressure washer before operating.

1.If you have siphoned chemicals, siphon a bucket of clean water through the chemical hose. NOTE: Failure to do so will cause damage to the pump.

2.Refer to engine manual for correct engine shut down procedure.

NOTE: NEVER turn the water off with the engine running.

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures.

STARTING

Prior to starting, refer to your engine manual for proper starting procedures for your engine type.

1.In a well ventilated outdoor area Add fresh high quality unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to engine manual for correct procedure.

2.Check engine oil level. See Engine Operators Manual for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

3.Verify the filter screen is in water inlet of pump. NOTE:

Cone side faces out.

Filter Screen

4.Connect water source to pump inlet.

NOTE: Water source must provide a minimum of 5 gallons per minute at 20 p.s.i.

5.Connect high pressure hose to pump outlet.

6.If applying a chemical or cleaning solution, see How To Siphon Chemicals/Cleaning Solvents in Operation section of this manual.

7.

Turn water source on. NOTE: Make sure water

 

High Pressure Hose

 

 

 

 

 

 

 

 

supply is turned on.

 

 

 

 

 

8.

Start engine. See Engine operators Manual for

 

 

 

 

 

 

correct procedure. NOTE: If the engine does not

 

 

 

 

 

 

start after two pulls, pull the trigger to relieve the

 

 

 

 

 

 

pressure.

 

 

 

 

 

9.

Depress trigger on gun to start water flow. NOTE:

 

 

 

 

 

 

Stand on a stable surface and grip gun/wand firmly

 

 

Water

 

 

with both hands. Expect the gun to kick when

 

 

Source

 

 

 

 

 

 

 

 

triggered.

 

 

 

 

 

10.Release trigger to stop water flow.

11.Adjust nozzle spray for the task being performed or change quick connect tip. See How To Use Wand instructions in this section.

D25805

12- ENG

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Operation Pressure WasherHOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand To Siphon CHEMICALS/CLEANING Solvents Read and Understand ALL Warnings Before Starting UnitPress chemical hose onto barbed fitting located Starting To Shut DownRelease trigger to stop water flow Maintenance How To Change Pump Oil Loosen oil fill capEngine PumpHOW to Clean the Water Inlet Filter WandStorage Engine PumpWindshield washer fluid may also be used Trouble Shooting Guide ProblemCausecorrection Problem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25805 Quick Facts Call

PCH3500C, D25805-025-1 specifications

The Porter-Cable D25805-025-1 and PCH3500C are powerful tools designed to meet the demands of both professionals and DIY enthusiasts. With advanced features and reliable technology, these products are tailored for efficiency and effectiveness in various tasks.

The D25805-025-1 is a high-performance rotary hammer that stands out for its robust design and versatility. It delivers exceptional drilling capabilities with its hammer drill function, allowing users to tackle tough materials like concrete and masonry with ease. One of the main features includes its variable speed control, which enables precise operation, allowing users to match the speed to the specific material and task at hand. The ergonomic handle provides a comfortable grip, reducing user fatigue during prolonged use.

Another key feature of the D25805-025-1 is its integrated vibration control technology. This innovation minimizes vibrations, enhancing user comfort and maintaining accuracy while working. It is also equipped with an adjustable depth stop for consistent hole depth, an essential feature for professional applications. The durable construction ensures longevity, making it a reliable choice for heavy-duty tasks.

On the other hand, the PCH3500C is an equally impressive tool, revered for its advanced circular saw capabilities. It operates at high speeds, facilitating fast cuts through a variety of materials. The 3500 RPM motor ensures efficient performance, while the laser guide feature allows for precise cutting lines, enhancing accuracy and minimizing waste.

The PCH3500C also boasts an adjustable bevel capacity, providing users with flexibility to make angled cuts. The lightweight design combined with an easy-to-grip handle ensures that even extended use remains comfortable. Safety features, including a blade guard and electric brake, protect the user and contribute to a safer work environment.

Both tools embody Porter-Cable's commitment to quality and innovation, making them suitable for a range of applications from home improvement projects to professional construction tasks. With their user-friendly designs and powerful performance characteristics, the D25805-025-1 and PCH3500C are excellent additions to any tool collection. Whether drilling into tough surfaces or making precise cuts, these tools provide reliability and efficiency, fulfilling the diverse needs of their users while upholding industry standards.
Top Page Image Contents