Porter-Cable D25805-025-1, PCH3500C instruction manual Hazard What can Happen

Page 4

HAZARD

WHAT CAN HAPPEN

• Breathing exhaust fumes will cause serious injury or death!

RISK TO

BREATHING

• Some cleaning fluids contain sub- stances which could cause injury to skin, eyes, or lungs.

HOW TO PREVENT IT

• Operate pressure washer in a well

ventilated area. Avoid enclosed

areas such as garages, basements,

etc.

• Never operate unit in a location

occupied by humans or animals.

• Use only cleaning fluids specifically

recommended for high pressure

washers. Follow manufacturers

recommendations. Do not use

chlorine bleach or any other

corrosive compound.

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

RISK TO FLUID

INJECTION

RISK OF

CHEMICAL

BURN

•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will dam- age carpet, paint or other surfaces in vehicles or trailers.

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

•Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

• If pressure washer is equipped with

a fuel shut-off valve, turn the valve

to the off position before

transporting to avoid fuel leaks. If

pressure washer is not equipped

with a fuel shut-off valve, drain the

fuel from tank before transporting.

Only transport fuel in an OSHA

approved container. Always place

pressure washer on a protective

mat when transporting to protect

against damage to vehicle from

leaks. Remove pressure washer

from vehicle immediately upon arrival

at your destination.

• Never place hands in front of nozzle.

• Direct spray away from self and

others.

• Make sure hose and fittings are

tightened and in good condition.

Never hold onto the hose or fittings

during operation.

• Do not allow hose to contact muf-

fler.

• Never attach or remove wand or

hose fittings while system is pres-

surized.

• To relieve system pressure, shut off

engine, turn off water supply, and

pull gun trigger until water stops

flowing.

• Use only hose and high pressure

accessories rated for pressure

higher than your pressure washer's

p.s.i.

• Do not use acids, gasoline, kero-

sene, or any other flammable

materials in this product. Use only

household detergents, cleaners and

degreasers recommended for use

in pressure washers.

• Wear protective clothing to protect

eyes and skin from contact with

sprayed materials.

D25805

4- ENG

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Operation Pressure WasherHOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting located To Shut Down StartingRelease trigger to stop water flow Maintenance How To Change Pump Oil Loosen oil fill capEngine PumpHOW to Clean the Water Inlet Filter WandEngine Pump StorageWindshield washer fluid may also be used Problem Trouble Shooting GuideCausecorrection Problem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25805 Quick Facts Call

PCH3500C, D25805-025-1 specifications

The Porter-Cable D25805-025-1 and PCH3500C are powerful tools designed to meet the demands of both professionals and DIY enthusiasts. With advanced features and reliable technology, these products are tailored for efficiency and effectiveness in various tasks.

The D25805-025-1 is a high-performance rotary hammer that stands out for its robust design and versatility. It delivers exceptional drilling capabilities with its hammer drill function, allowing users to tackle tough materials like concrete and masonry with ease. One of the main features includes its variable speed control, which enables precise operation, allowing users to match the speed to the specific material and task at hand. The ergonomic handle provides a comfortable grip, reducing user fatigue during prolonged use.

Another key feature of the D25805-025-1 is its integrated vibration control technology. This innovation minimizes vibrations, enhancing user comfort and maintaining accuracy while working. It is also equipped with an adjustable depth stop for consistent hole depth, an essential feature for professional applications. The durable construction ensures longevity, making it a reliable choice for heavy-duty tasks.

On the other hand, the PCH3500C is an equally impressive tool, revered for its advanced circular saw capabilities. It operates at high speeds, facilitating fast cuts through a variety of materials. The 3500 RPM motor ensures efficient performance, while the laser guide feature allows for precise cutting lines, enhancing accuracy and minimizing waste.

The PCH3500C also boasts an adjustable bevel capacity, providing users with flexibility to make angled cuts. The lightweight design combined with an easy-to-grip handle ensures that even extended use remains comfortable. Safety features, including a blade guard and electric brake, protect the user and contribute to a safer work environment.

Both tools embody Porter-Cable's commitment to quality and innovation, making them suitable for a range of applications from home improvement projects to professional construction tasks. With their user-friendly designs and powerful performance characteristics, the D25805-025-1 and PCH3500C are excellent additions to any tool collection. Whether drilling into tough surfaces or making precise cuts, these tools provide reliability and efficiency, fulfilling the diverse needs of their users while upholding industry standards.
Top Page Image Contents