Porter-Cable D25805-025-1, PCH3500C Trouble Shooting Guide, Problem, Causecorrection

Page 16

PROBLEM

TROUBLE SHOOTING GUIDE

CAUSECORRECTION

Engine will not start (see Engine Manual for further engine troubleshooting)

No or low pressure (initial use)

No fuel.

Low oil (if equipped with low oil shutdown).

Pressure builds up after two pulls on the recoil starter or after initial use.

Not primed or choked.

Spark plug wire not attached.

Engine ON/OFF switch in OFF position (If applicable.)

Choke lever in the “Choke” position on a “hot” engine or an engine that has been exposed to thermal heat for a long period of time.

Fuel valve closed (if equipped)

Wand not in high pressure.

Low water supply.

Leak at high pressure hose.

Nozzle obstructed.

Water filter screen clogged.

Defective E-Z start valve.

Air in hose.

Choke lever in the “Choke” position.

Throttle control lever is not in the “Fast” position. (if equipped)

High pressure hose is too long.

Add Fuel.

Add required amount of oil.

Squeeze gun trigger to relieve pressure.

Push primer bulb 3 times or choke engine.

Attach spark plug wire.

Place engine ON/OFF switch in on position.

Move choke to the “No Choke” position.

Move the fuel valve lever to the “Open” position.

See How to Use Wand paragraph in the Operation Section.

Water supply must be at least 5 GPM @ 20 PSI.

Repair leak. Apply sealant tape if necessary.

Clean nozzle with paper clip or nozzle cleaning tool, pour water into nozzle end to flush out ob- struction.

Remove and clean filter.

Check with Authorized Warranty Service Center (AWSC.)

Turn off the engine, then the water source. Disconnect the water source from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off. Reconnect water source to pump inlet and turn on water source. Squeeze trigger to re- move remaining air

Move choke to the “No Choke” position.

Move throttle control lever to the “Fast” position.

Use high pressure hose under 100 feet.

D25805

16- ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instruction General Information Safety Guidelines / Definitions Important Safety InstructionsHazard What can Happen Light or unsecured objects can become hazardous projectiles BOX Contents Assembly Operation Pressure WasherHOW to USE To Adjust PressureBasic Elements of Engine Pressure Washer TerminologyTo USE Wand Read and Understand ALL Warnings Before Starting Unit To Siphon CHEMICALS/CLEANING SolventsPress chemical hose onto barbed fitting located To Shut Down StartingRelease trigger to stop water flow Maintenance How To Change Pump Oil Loosen oil fill capEngine PumpHOW to Clean the Water Inlet Filter WandEngine Pump StorageWindshield washer fluid may also be used Problem Trouble Shooting GuideCausecorrection Problem Cause Correction ChemicalsLimited Warranty Responsibility of Original Purchaser initial UserENG D25805 Quick Facts Call

PCH3500C, D25805-025-1 specifications

The Porter-Cable D25805-025-1 and PCH3500C are powerful tools designed to meet the demands of both professionals and DIY enthusiasts. With advanced features and reliable technology, these products are tailored for efficiency and effectiveness in various tasks.

The D25805-025-1 is a high-performance rotary hammer that stands out for its robust design and versatility. It delivers exceptional drilling capabilities with its hammer drill function, allowing users to tackle tough materials like concrete and masonry with ease. One of the main features includes its variable speed control, which enables precise operation, allowing users to match the speed to the specific material and task at hand. The ergonomic handle provides a comfortable grip, reducing user fatigue during prolonged use.

Another key feature of the D25805-025-1 is its integrated vibration control technology. This innovation minimizes vibrations, enhancing user comfort and maintaining accuracy while working. It is also equipped with an adjustable depth stop for consistent hole depth, an essential feature for professional applications. The durable construction ensures longevity, making it a reliable choice for heavy-duty tasks.

On the other hand, the PCH3500C is an equally impressive tool, revered for its advanced circular saw capabilities. It operates at high speeds, facilitating fast cuts through a variety of materials. The 3500 RPM motor ensures efficient performance, while the laser guide feature allows for precise cutting lines, enhancing accuracy and minimizing waste.

The PCH3500C also boasts an adjustable bevel capacity, providing users with flexibility to make angled cuts. The lightweight design combined with an easy-to-grip handle ensures that even extended use remains comfortable. Safety features, including a blade guard and electric brake, protect the user and contribute to a safer work environment.

Both tools embody Porter-Cable's commitment to quality and innovation, making them suitable for a range of applications from home improvement projects to professional construction tasks. With their user-friendly designs and powerful performance characteristics, the D25805-025-1 and PCH3500C are excellent additions to any tool collection. Whether drilling into tough surfaces or making precise cuts, these tools provide reliability and efficiency, fulfilling the diverse needs of their users while upholding industry standards.
Top Page Image Contents