Porter-Cable D26729-028-0 instruction manual Connecting Electrical Loads

Page 13

CONNECTING ELECTRICAL LOADS

1.Let engine run and warm up for five minutes after starting with no electrical load.

Connect loads in the following manner to prevent damage to equipment:

2.Connect inductive load equipment first, inductive loads consist of refrigerators, freezers, water pumps, air conditioners, or small hand tools. Connect the items that require the most wattage first. See Wattage Calcu- lation Section in this manual.

3.Connect the lights next.

4.Voltage sensitive equipment should be the last equipment connected to the generator. Plug voltage sensitive appliances such at TV's, VCR's, micro- waves, ovens, computers, and cordless telephones into a UL listed voltage surge protector, then connect the UL listed voltage surge protector to the generator.

Failure to connect and operate equipment in this sequence can cause damage to equipment and will void the warranty

on your generator.

Follow the wattage calculation table in the Wattage Calculation section of this manual. Overloading the generator will cause power fluctuations and can damage equipment and appliances.

Porter-Cable Corporation will only be responsible for damage to customer's equipment when the generator is determined to be defective. This determination will only be made by an authorized representative of Porter-Cable Corporation and this decision will be final. Porter-Cable Corporation reserves the right to inspect the electrical connections at the customer's site of operation and test the generator for proper operation before any determination of liability is made. Failure to maintain the equipment or wiring for inspection will void any claim for damages by the customer. Porter-Cable Corporation will not be responsible for equipment damaged as a result of voltage surges, improper operation or improper installation of the generator.

13- ENG

D26729

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Generator Consumer Safety Information Consumer General and Service InformationImportant Safety Instructions Safety Guidelines / DefinitionsWhen installing a Double Risk of Electrocution and FireRisk of Electrocution and Fire When damagedOperation Generator in rainUnit Indoors or in ANY Risk of FireConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Risk of Moving Parts SpecificationsRisk from Lifting Remove Generator from Carton AssemblyOther Loose Parts Grounding the GeneratorObtaining Electricity from the Generator Double Throw Transfer SwitchExtension Cords Operation Stopping Engine Connecting Electrical Loads Engine Maintenance MaintenanceGenerator Maintenance Customer Responsibilities TableEngine Preparation StorageGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D26729 Quick Facts

D26729-028-0 specifications

The Porter-Cable D26729-028-0 is a powerful and versatile oscillating tool designed for professionals and DIY enthusiasts alike. Known for its robust functionality, the tool enhances precision and efficiency in various applications ranging from cutting to sanding. With a dedicated focus on user needs, the D26729 model embodies the blend of innovative technology and dependable craftsmanship that Porter-Cable is renowned for.

One of the standout features of the D26729-028-0 is its powerful motor. The 3.0-amp motor delivers consistent performance, making it suitable for demanding tasks while ensuring minimal downtime between projects. This ensures that users can tackle a variety of materials, including wood, metal, and plaster, with ease. The variable speed control allows for customization of the oscillation frequency, offering users the ability to adjust the tool’s performance based on the specific application and material, ensuring optimal results every time.

The tool’s design emphasizes ergonomics, featuring a user-friendly grip and lightweight build that minimizes fatigue during extended use. This thoughtful design enables greater control and comfort, allowing users to maintain focus and precision throughout their tasks. The quick-change accessory system is another significant characteristic of the D26729-028-0, enabling users to swiftly switch between accessories without the need for tools. This feature increases workflow efficiency and allows for easy transitions between different applications, such as sanding or cutting.

Durability is a key aspect of the Porter-Cable D26729-028-0, constructed with high-quality materials that can withstand the rigors of professional use. The device is also designed to reduce vibrations during operation, enhancing comfort and control. Its dust collection feature ensures a cleaner working environment by minimizing debris spread, further contributing to the tool’s overall user-centric design.

Additionally, the D26729 model is compatible with a wide array of accessories, making it a flexible addition to any toolbox. This compatibility extends the functionality of the tool, allowing it to serve multiple purposes in various projects, from home improvement to intricate woodworking tasks.

In summary, the Porter-Cable D26729-028-0 oscillating tool combines power, precision, and user-friendly features, making it an essential tool for both professionals and hobbyists. With its advanced technologies and robust design, it caters to a broad spectrum of applications, enhancing productivity while ensuring optimal results.
Top Page Image Contents