Porter-Cable D26729-028-0 instruction manual Troubleshooting Guide, Start

Page 19

TROUBLESHOOTING GUIDE

PROBLEM

 

CAUSE

 

CORRECTION

 

 

 

 

 

Engine will not

1.

Low on fuel or oil.

1.

Add fuel or oil.

start

2.

Ignition switch in "Off"

2.

Turn to "ON" position

 

 

 

position.

 

 

 

3.

Faulty spark plug.

3.

Replace spark plug.

 

4.

Not primed.

4. Push primer bulb 3 times.

 

5.

Fuel shut-off valve in

5.

Open fuel shut-off valve.

 

 

closed position

 

 

 

6.

Unit loaded during start-

6.

Remove load from unit.

 

 

up.

 

 

 

7.

Spark plug wire loose.

7.

Attach wire to spark plug.

 

 

 

 

 

No electrical

1.

Faulty receptacle.

1.

Have Service Center

output

2.

Circuit breaker kicked

 

replace.

 

2.

Depress and reset.

 

 

out.

 

 

 

3.

Defective capacitor.

3.

Have Service Center

 

 

 

 

replace capacitor.

 

4.

Faulty power cord.

4.

Repair or replace cord.

 

5.

GFCI switch breaker

5.

Depress and reset

 

 

kicked out (if equipped)

 

 

Repeated

1.

Overload

1.

Reduce load.

circuit breaker

2.

Faulty cords or

2.

Check for damaged, bare,

tripping

 

equipment

 

or frayed wires on

 

 

 

 

 

 

 

equipment. Replace.

 

 

 

 

 

Generator

1.

Generator overloaded.

1.

Reduce load.

overheating

2.

Insufficient ventilation.

2.

Move to adequate supply

 

 

 

 

 

of fresh air.

19- ENG

D26729

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Generator Consumer Safety Information Consumer General and Service InformationRisk of Electrocution and Fire Safety Guidelines / DefinitionsImportant Safety Instructions When installing a DoubleGenerator in rain When damagedRisk of Electrocution and Fire OperationUnit Indoors or in ANY Risk of FireConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Risk of Moving Parts SpecificationsRisk from Lifting Grounding the Generator AssemblyRemove Generator from Carton Other Loose PartsObtaining Electricity from the Generator Double Throw Transfer SwitchExtension Cords Operation Stopping Engine Connecting Electrical Loads Customer Responsibilities Table MaintenanceEngine Maintenance Generator MaintenanceEngine Preparation StorageGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D26729 Quick Facts

D26729-028-0 specifications

The Porter-Cable D26729-028-0 is a powerful and versatile oscillating tool designed for professionals and DIY enthusiasts alike. Known for its robust functionality, the tool enhances precision and efficiency in various applications ranging from cutting to sanding. With a dedicated focus on user needs, the D26729 model embodies the blend of innovative technology and dependable craftsmanship that Porter-Cable is renowned for.

One of the standout features of the D26729-028-0 is its powerful motor. The 3.0-amp motor delivers consistent performance, making it suitable for demanding tasks while ensuring minimal downtime between projects. This ensures that users can tackle a variety of materials, including wood, metal, and plaster, with ease. The variable speed control allows for customization of the oscillation frequency, offering users the ability to adjust the tool’s performance based on the specific application and material, ensuring optimal results every time.

The tool’s design emphasizes ergonomics, featuring a user-friendly grip and lightweight build that minimizes fatigue during extended use. This thoughtful design enables greater control and comfort, allowing users to maintain focus and precision throughout their tasks. The quick-change accessory system is another significant characteristic of the D26729-028-0, enabling users to swiftly switch between accessories without the need for tools. This feature increases workflow efficiency and allows for easy transitions between different applications, such as sanding or cutting.

Durability is a key aspect of the Porter-Cable D26729-028-0, constructed with high-quality materials that can withstand the rigors of professional use. The device is also designed to reduce vibrations during operation, enhancing comfort and control. Its dust collection feature ensures a cleaner working environment by minimizing debris spread, further contributing to the tool’s overall user-centric design.

Additionally, the D26729 model is compatible with a wide array of accessories, making it a flexible addition to any toolbox. This compatibility extends the functionality of the tool, allowing it to serve multiple purposes in various projects, from home improvement to intricate woodworking tasks.

In summary, the Porter-Cable D26729-028-0 oscillating tool combines power, precision, and user-friendly features, making it an essential tool for both professionals and hobbyists. With its advanced technologies and robust design, it caters to a broad spectrum of applications, enhancing productivity while ensuring optimal results.
Top Page Image Contents