Porter-Cable D28362-031-0 Obtaining Electricity from the Generator, Extension Cords

Page 10

OBTAINING ELECTRICITY FROM THE GENERATOR

There are basically 2 ways to obtain electricity from a generator:

1.Use of extension cords directly from the generator to the appliance, lights, tools, etc.

2.Use of a double-throw transfer switch installed directly to the main electrical supply outside of house.

EXTENSION CORDS

When using an appliance or tool at a considerable distance from the generator, a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that accepts the tool's plug MUST be used in order to reduce the risk of electrical shock. A cord of adequate size must be used. Using the following chart to determine the minimum wire size required.

Extension Cord Wire Gauge Chart

Cord

Wire Gauge

 

Length

Size

Amperage

0 to 100 ft.

12 ga.

*Up to 20 amp draw

 

 

 

0 to 100 ft.

10 ga.

Up to 30 amp draw

*NOTE: When amperage exceeds 20 amp; a 12 gauge extension cord should not be used for long distances.

An extension cord that is hot to the touch is overloaded.

Repair or replace damaged extension cords immediately.

DOUBLE THROW TRANSFER SWITCH

Potential hazards exist when a portable electric generator is connected to the main electrical supply coming into the house.

It is at that point that the electrical generator could feed back into the utility company's system causing possible electrocution of workers who are repairing the electrical lines.

To avoid back feeding of electricity into utility systems, a double-throw transfer switch must be installed between the generator and utility power. The Double- Throw Transfer Switch should be installed by a licensed electrician and in com- pliance with all state and local electrical codes. (When installing a Double-

Throw Transfer Switch, a minimum of 10 gauge wiring must be used.)

The electrician should also install a sub-panel to isolate the circuits you would want to use during an emergency or electrical power outage. Your generator will not be large enough to handle the load of all the lights, appliances, TV, etc. at one time. To select which items to run during the electrical power outage, see Wattage Calculation section in this manual.

D28362

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Generator Consumer General and Service Information Consumer Safety InformationWhen installing a Double Safety Guidelines / DefinitionsImportant Safety Instructions Risk of Electrocution and FireOperation When damagedRisk of Electrocution and Fire Generator in rainUnit Indoors or in ANY Risk of FireConfined Area Risk of Breathing Inhalation Hazard Risk of Unsafe OperationRisk of HOT Surfaces Risk of Moving Parts SpecificationsRisk from Lifting Other Loose Parts AssemblyRemove Generator from Carton Grounding the GeneratorObtaining Electricity from the Generator Double Throw Transfer SwitchExtension Cords Operation To Start the Engine Connecting Electrical Loads Stopping EngineGenerator Maintenance MaintenanceEngine Maintenance Customer Responsibilities TableEngine Preparation StorageGenerator Wattage Calculations Determining Wattage RequirementsApplication Guide Starting Wattage RequirementsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide StartLimited Warranty Responsibility of Original Purchaser initial UserENG D28362 Quick Facts

D28362-031-0 specifications

The Porter-Cable D28362-031-0 is a robust and versatile angle grinder designed for both professionals and DIY enthusiasts seeking reliable performance in various grinding and cutting applications. With a powerful motor and a variety of features, this tool stands out in the competitive market of power tools.

One of the main features of the D28362-031-0 is its 13-amp motor, which provides a no-load speed of up to 8,500 RPM. This high-speed capability allows users to tackle a variety of tasks swiftly, including metal grinding, deburring, and cutting through tougher materials. The grinder's substantial power output ensures efficiency and helps to extend the lifespan of the tool, making it ideal for heavy-duty applications.

The design of the Porter-Cable D28362-031-0 emphasizes user comfort and control. It features an ergonomic side handle that can be adjusted to multiple positions, allowing for optimal grip and reducing operator fatigue during extended use. The tool is also equipped with a protective labyrinth design, which helps to keep dust and debris out of the motor, enhancing durability and operational longevity.

Safety is paramount with the D28362-031-0. It includes a quick-release guard that can be easily adjusted without the need for tools, allowing users to switch from grinding to cutting tasks smoothly. Additionally, the protected switch prevents accidental activation, ensuring that the tool is only operational when intended.

Another significant characteristic of the D28362-031-0 is its durability. The unit is constructed with high-quality materials designed to withstand harsh work environments. The heavy-duty housing adds an extra layer of resilience, making this grinder suitable for job sites where tools are subject to wear and tear.

Moreover, the D28362-031-0 is compatible with various accessories, including grinding wheels, cut-off blades, and sanding discs. This versatility enables users to customize their tasks according to their specific needs, whether in metalworking, masonry, or general construction.

Overall, the Porter-Cable D28362-031-0 angle grinder combines power, comfort, and safety, making it an excellent addition to any tool collection. Its design philosophy focused on user experience ensures that both professionals and hobbyists can achieve precise results in their projects while enjoying the durability and reliability of this high-performance tool. With the D28362-031-0, Porter-Cable continues to deliver quality that meets the demands of today’s skilled tradespeople.
Top Page Image Contents