Porter-Cable D28362-031-0 instruction manual Stopping Engine, Connecting Electrical Loads

Page 13

STOPPING ENGINE

1.Disconnect all electrical loads.

2.Turn ON/OFF switch to "OFF" position.

3.Close fuel shut-off valve.

CONNECTING ELECTRICAL LOADS

1.Let engine run and warm up for five minutes after starting with no electrical load.

Connect loads in the following manner to prevent damage to equipment:

2.Connect inductive load equipment first, inductive loads consist of refrigerators, freezers, water pumps, air conditioners, or small hand tools. Connect the items that require the most wattage first. See Wattage Calcu- lation Section in this manual.

3.Connect the lights next.

4.Voltage sensitive equipment should be the last equipment connected to the generator. Plug voltage sensitive appliances such at TV's, VCR's, micro- waves, ovens, computers, and cordless telephones into a UL listed voltage surge protector, then connect the UL listed voltage surge protector to the generator.

Failure to connect and operate equipment in this sequence can cause damage to equipment and will void the warranty

on your generator.

Follow the wattage calculation table in the Wattage Calculation section of this manual. Overloading the generator will cause power fluctuations and can damage equipment and appliances.

Porter-Cable Corporation will only be responsible for damage to customer's equipment when the generator is determined to be defective. This determination will only be made by an authorized representative of Porter-Cable Corporation and this decision will be final. Porter-Cable Corporation reserves the right to inspect the electrical connections at the customer's site of operation and test the generator for proper operation before any determination of liability is made. Failure to maintain the equipment or wiring for inspection will void any claim for damages by the customer. Porter-Cable Corporation will not be responsible for equipment damaged as a result of voltage surges, improper operation or improper installation of the generator.

13- ENG

D28362

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Generator Consumer Safety Information Consumer General and Service InformationImportant Safety Instructions Safety Guidelines / DefinitionsWhen installing a Double Risk of Electrocution and FireRisk of Electrocution and Fire When damagedOperation Generator in rainUnit Indoors or in ANY Risk of FireConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Risk of Moving Parts SpecificationsRisk from Lifting Remove Generator from Carton AssemblyOther Loose Parts Grounding the GeneratorObtaining Electricity from the Generator Double Throw Transfer SwitchExtension Cords Operation To Start the Engine Stopping Engine Connecting Electrical LoadsEngine Maintenance MaintenanceGenerator Maintenance Customer Responsibilities TableEngine Preparation StorageGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D28362 Quick Facts

D28362-031-0 specifications

The Porter-Cable D28362-031-0 is a robust and versatile angle grinder designed for both professionals and DIY enthusiasts seeking reliable performance in various grinding and cutting applications. With a powerful motor and a variety of features, this tool stands out in the competitive market of power tools.

One of the main features of the D28362-031-0 is its 13-amp motor, which provides a no-load speed of up to 8,500 RPM. This high-speed capability allows users to tackle a variety of tasks swiftly, including metal grinding, deburring, and cutting through tougher materials. The grinder's substantial power output ensures efficiency and helps to extend the lifespan of the tool, making it ideal for heavy-duty applications.

The design of the Porter-Cable D28362-031-0 emphasizes user comfort and control. It features an ergonomic side handle that can be adjusted to multiple positions, allowing for optimal grip and reducing operator fatigue during extended use. The tool is also equipped with a protective labyrinth design, which helps to keep dust and debris out of the motor, enhancing durability and operational longevity.

Safety is paramount with the D28362-031-0. It includes a quick-release guard that can be easily adjusted without the need for tools, allowing users to switch from grinding to cutting tasks smoothly. Additionally, the protected switch prevents accidental activation, ensuring that the tool is only operational when intended.

Another significant characteristic of the D28362-031-0 is its durability. The unit is constructed with high-quality materials designed to withstand harsh work environments. The heavy-duty housing adds an extra layer of resilience, making this grinder suitable for job sites where tools are subject to wear and tear.

Moreover, the D28362-031-0 is compatible with various accessories, including grinding wheels, cut-off blades, and sanding discs. This versatility enables users to customize their tasks according to their specific needs, whether in metalworking, masonry, or general construction.

Overall, the Porter-Cable D28362-031-0 angle grinder combines power, comfort, and safety, making it an excellent addition to any tool collection. Its design philosophy focused on user experience ensures that both professionals and hobbyists can achieve precise results in their projects while enjoying the durability and reliability of this high-performance tool. With the D28362-031-0, Porter-Cable continues to deliver quality that meets the demands of today’s skilled tradespeople.
Top Page Image Contents