Porter-Cable D28362-031-0 instruction manual Storage, Engine Preparation, Generator

Page 15

STORAGE

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach

an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

ENGINE PREPARATION

1.Add fuel stabilizer to fuel tank to minimize the formation of fuel gum deposits during storage.

2.Run engine at least 10 minutes after adding stabilizer to allow it to enter the fuel system.

3.Next shut off engine.

4.Disconnect the spark plug wire and remove the spark plug.

5.Add one teaspoon of oil through the spark plug hole.

6.Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

7.Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

GENERATOR

Clean the generator as outlined in the Maintenance Section on this manual.

Check that cooling air slots and openings on generator are open and unobstructed.

15- ENG

D28362

Image 15
Contents Generator Consumer Safety Information Consumer General and Service InformationRisk of Electrocution and Fire Safety Guidelines / DefinitionsImportant Safety Instructions When installing a DoubleGenerator in rain When damagedRisk of Electrocution and Fire OperationRisk of Fire Unit Indoors or in ANYConfined Area Risk of Unsafe Operation Risk of Breathing Inhalation HazardRisk of HOT Surfaces Specifications Risk of Moving PartsRisk from Lifting Grounding the Generator AssemblyRemove Generator from Carton Other Loose PartsDouble Throw Transfer Switch Obtaining Electricity from the GeneratorExtension Cords Operation To Start the Engine Stopping Engine Connecting Electrical LoadsCustomer Responsibilities Table MaintenanceEngine Maintenance Generator MaintenanceStorage Engine PreparationGenerator Determining Wattage Requirements Wattage CalculationsStarting Wattage Requirements Application GuideAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorStart Troubleshooting GuideResponsibility of Original Purchaser initial User Limited WarrantyENG D28362 Quick Facts

D28362-031-0 specifications

The Porter-Cable D28362-031-0 is a robust and versatile angle grinder designed for both professionals and DIY enthusiasts seeking reliable performance in various grinding and cutting applications. With a powerful motor and a variety of features, this tool stands out in the competitive market of power tools.

One of the main features of the D28362-031-0 is its 13-amp motor, which provides a no-load speed of up to 8,500 RPM. This high-speed capability allows users to tackle a variety of tasks swiftly, including metal grinding, deburring, and cutting through tougher materials. The grinder's substantial power output ensures efficiency and helps to extend the lifespan of the tool, making it ideal for heavy-duty applications.

The design of the Porter-Cable D28362-031-0 emphasizes user comfort and control. It features an ergonomic side handle that can be adjusted to multiple positions, allowing for optimal grip and reducing operator fatigue during extended use. The tool is also equipped with a protective labyrinth design, which helps to keep dust and debris out of the motor, enhancing durability and operational longevity.

Safety is paramount with the D28362-031-0. It includes a quick-release guard that can be easily adjusted without the need for tools, allowing users to switch from grinding to cutting tasks smoothly. Additionally, the protected switch prevents accidental activation, ensuring that the tool is only operational when intended.

Another significant characteristic of the D28362-031-0 is its durability. The unit is constructed with high-quality materials designed to withstand harsh work environments. The heavy-duty housing adds an extra layer of resilience, making this grinder suitable for job sites where tools are subject to wear and tear.

Moreover, the D28362-031-0 is compatible with various accessories, including grinding wheels, cut-off blades, and sanding discs. This versatility enables users to customize their tasks according to their specific needs, whether in metalworking, masonry, or general construction.

Overall, the Porter-Cable D28362-031-0 angle grinder combines power, comfort, and safety, making it an excellent addition to any tool collection. Its design philosophy focused on user experience ensures that both professionals and hobbyists can achieve precise results in their projects while enjoying the durability and reliability of this high-performance tool. With the D28362-031-0, Porter-Cable continues to deliver quality that meets the demands of today’s skilled tradespeople.