Poulan 954 14 01-10 Customer Responsibilities, Blade Care, MAINTENANCE,SERVICE or Adjust Ments

Page 10

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any main- tenance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your tractor owner's manual.

CAUTION:BEFORE PERFORMING ANY

MAINTENANCE,SERVICE OR ADJUST-

MENTS:

Depress clutch brake pedal fully and set parking brake.

Place gearshift/motion control lever in "NEUTRAL" position.

Place clutch control in "DISENGAGED" position.

Turn ignition key to "OFF" position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

CAUTION: Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION: Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

10

Image 10
Contents WNER’S Manual 341Safe Operation Practices for Ride-On Mowers Table of Contents Carton Contents Parts Identification AssemblyUse Hardware - Group a See Figs a & 2B To Remove the Support Assembly See CSupport Assembly See Fig Use Hardware - Group BContainer Mounting See No hardware required No hardware requiredNo hardware required Upper Chute See Figs a & 7BLevel Mower Deck No hardware required Operation Tips for Improved Bagging OperationCustomer Responsibilities MAINTENANCE,SERVICE or Adjust MentsBlade Care Page Repair Parts / Pièces DE Rechange KEY Part Description