Poulan 402337 Safe Operation Practices for Ride-On Mowers, General Operation, II. Slope Operation

Page 2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent ac- cidental starting when setting up, transporting, adjusting or making re- pairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Do not coast down a hill in neutral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and com- ply with specifications of the manu- facturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Al- ways look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Ma- terial may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the infl uence of alcohol or drugs.

Watch for traffic when operating near or crossing road- ways.

Use extra care when loading or unloading the machine into a trailer or truck.

Always wear eye protection when operating machine.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- lated injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Follow the manufacturer's recommendation for wheel weights or counterweights.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust/engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes, not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

Do not try to stabilize the machine by putting your foot on the ground.

Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

Be alert and turn machine off if a child enters the area.

Before and while backing, look behind and down for small children.

Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation.Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a

2 child.

Image 2
Contents Assembly Operation Customer Responsibilities Repair Parts II. Slope Operation Safe Operation Practices for Ride-On MowersGeneral Operation III. ChildrenTable of Contents Know Your Grass Catcher Carton ContentsTools Required for Assembly Unpacking InstructionsDrawbar a See Figs A, 1B & 1C AssemblyBagger Support Assembly Drawbar B See DSupport Assembly See Fig Container Assembly See FigWith Rear Gauge Wheels Container Mounting See FigMounting TAB See a WithoutMounting TAB See B With Rear WithoutUpper Chute See Figs a & 6B Level MowerOperation Tips for Improved Bagging OperationBlade Care MAINTENANCE,SERVICE or Adjust MentsCustomer Responsibilities Repair PARTS/PIÈCES DE Rechange KEY Part Description

402337, 960 72 00-07, QCT342 specifications

The Poulan 960 72 00-07,402337,QCT342 is a versatile and powerful piece of equipment designed for both professional landscapers and home gardening enthusiasts. This model, part of Poulan's robust lineup of outdoor power tools, combines innovative technologies with user-friendly features to enhance efficiency and performance.

One of the standout features of the Poulan 960 72 00-07,402337,QCT342 is its reliable engine. Equipped with a high-performance gas engine, this tool delivers impressive power, making it suitable for a variety of tasks, from trimming hedges to clearing brush. The engine is designed to minimize emissions and improve fuel efficiency, aligning with modern environmental standards.

The ergonomic design of the Poulan 960 72 00-07,402337,QCT342 is another highlight. It features padded grips and a balanced frame that reduces user fatigue, allowing for extended use without discomfort. The lightweight construction contributes to its ease of maneuverability, making it ideal for both detailed work and larger projects.

This model incorporates advanced cutting technologies, which enable clean and precise cuts. The blades are crafted from high-quality materials, ensuring longevity and sharpness over time. Additionally, the adjustable cutting height feature allows users to customize their experience based on the specifics of the task at hand.

Safety is a crucial consideration in any outdoor power tool, and the Poulan 960 72 00-07,402337,QCT342 excels in this regard. It comes with safety features such as a reliable brake system and an easy-to-use throttle control. These features not only enhance user safety but also promote a seamless operation experience.

Ease of maintenance is also a key characteristic of this model. The design allows for quick access to vital components, making it straightforward for users to perform regular checks and maintenance tasks. This simplicity not only extends the life of the tool but also ensures optimal performance with minimal effort.

In conclusion, the Poulan 960 72 00-07,402337,QCT342 is a reliable, efficient, and user-friendly tool that meets the diverse needs of garden care and landscaping. With its powerful engine, ergonomic design, advanced cutting technologies, safety features, and ease of maintenance, it is an excellent choice for anyone looking to invest in a high-quality outdoor power tool. Whether for professional use or DIY projects, this model promises to deliver exceptional results.