Poulan 402337, QCT342 Customer Responsibilities, Blade Care, MAINTENANCE,SERVICE or Adjust Ments

Page 11

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any main- tenance.

•Before each use check for loose fasteners.

•Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

•See BLADE CARE instructions in your tractor owner's manual.

CAUTION:BEFORE PERFORMING ANY

MAINTENANCE,SERVICE OR ADJUST-

MENTS:

•Depress clutch brake pedal fully and set parking brake.

•Place gearshift/motion control lever in "NEUTRAL" position.

•Place clutch control in "DISENGAGED" position.

•Turn ignition key to "OFF" position.

•Make sure blades and all moving parts have completely stopped.

•Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

CAUTION: Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION: Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Assembly Operation Customer Responsibilities Repair Parts III. Children Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationTable of Contents Unpacking Instructions Carton ContentsTools Required for Assembly Know Your Grass CatcherDrawbar B See D AssemblyBagger Support Assembly Drawbar a See Figs A, 1B & 1CContainer Assembly See Fig Support Assembly See FigWithout Container Mounting See FigMounting TAB See a With Rear Gauge WheelsWith Rear Without Mounting TAB See BLevel Mower Upper Chute See Figs a & 6BTips for Improved Bagging Operation OperationBlade Care MAINTENANCE,SERVICE or Adjust MentsCustomer Responsibilities Repair PARTS/PIÈCES DE Rechange KEY Part Description

402337, 960 72 00-07, QCT342 specifications

The Poulan 960 72 00-07,402337,QCT342 is a versatile and powerful piece of equipment designed for both professional landscapers and home gardening enthusiasts. This model, part of Poulan's robust lineup of outdoor power tools, combines innovative technologies with user-friendly features to enhance efficiency and performance.

One of the standout features of the Poulan 960 72 00-07,402337,QCT342 is its reliable engine. Equipped with a high-performance gas engine, this tool delivers impressive power, making it suitable for a variety of tasks, from trimming hedges to clearing brush. The engine is designed to minimize emissions and improve fuel efficiency, aligning with modern environmental standards.

The ergonomic design of the Poulan 960 72 00-07,402337,QCT342 is another highlight. It features padded grips and a balanced frame that reduces user fatigue, allowing for extended use without discomfort. The lightweight construction contributes to its ease of maneuverability, making it ideal for both detailed work and larger projects.

This model incorporates advanced cutting technologies, which enable clean and precise cuts. The blades are crafted from high-quality materials, ensuring longevity and sharpness over time. Additionally, the adjustable cutting height feature allows users to customize their experience based on the specifics of the task at hand.

Safety is a crucial consideration in any outdoor power tool, and the Poulan 960 72 00-07,402337,QCT342 excels in this regard. It comes with safety features such as a reliable brake system and an easy-to-use throttle control. These features not only enhance user safety but also promote a seamless operation experience.

Ease of maintenance is also a key characteristic of this model. The design allows for quick access to vital components, making it straightforward for users to perform regular checks and maintenance tasks. This simplicity not only extends the life of the tool but also ensures optimal performance with minimal effort.

In conclusion, the Poulan 960 72 00-07,402337,QCT342 is a reliable, efficient, and user-friendly tool that meets the diverse needs of garden care and landscaping. With its powerful engine, ergonomic design, advanced cutting technologies, safety features, and ease of maintenance, it is an excellent choice for anyone looking to invest in a high-quality outdoor power tool. Whether for professional use or DIY projects, this model promises to deliver exceptional results.
Top Page Image Contents