Poulan 960 72 00-07, QCT342, 402337 owner manual Tips for Improved Bagging Operation

Page 10

OPERATION

TIPS FOR IMPROVED BAGGING

OPERATION:

Follow the mower operation instructions in your tractor owner's manual.

When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time. The amount collected and the total time of operation may be greater than you will experience with regular use of your grass catcher.

Always run throttle at full speed when bagging.

Select a gear low enough to give good mower cutting performance, good quality cut and good bagging performance.

NOTE: It may be necessary to overlap width of cut to suit your conditions.

If grass is extremely tall, it should be mowed twice.The first time relatively high, the second time to desired height.

Use left hand side of mower for trimming.

Plastic trash bags can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full:

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

b.Raise seat. Unlatch and raise cover.

c.Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails.

d.With the container resting on the ground, close and secure the top of the plastic lawn bag.

e.Tip the container on its side and slide the fi lled bag from the container.

f.Install a new plastic lawn bag with the edges of the bag draped over upper lip of the container.

g.Repeat for other containers.

h.Reinstall containers making sure right container overlaps left container at center supports.

j.Close cover and secure latches over center support tubes.

Avoid cutting wet grass or in the morning while the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and adhere to the walls of the flow path causing clogging.

Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fi ll. The wheel will be spinning fastest just before the bags fi ll completely. When the wheel stops, it indicates that the bags are full and the chutes have become clogged.

NOTE: To help prevent clogging of chutes, check/empty bags when the wheel is spinning fast. Experience will teach you the best time to empty the bags.

Care should be taken not to damage the parts and that the wheel spins freely at the beginning of each use.

If the grass catcher fails to pick up cut grass or leaves, it is an indication that clogging has occurred in the system or that the grass catcher containers are full. Usually this is indicated by the stopped movement of the full bagger indicator.

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

-Raise seat. Unlatch and raise cover.

-Slide out containers and dispose of clippings .

-Replace containers, close cover, and latch.

b.Unlatch chutes and check for clogging.

-Remove all debris in chutes.

-Reassemble and latch chutes

c.Check to insure full bagger indicator has not become clogged.

-The air passage hole must be clear of debris. Gently insert a small twig or wire into passageway to clear.

CAUTION

Do not operate mower with grass catcher partially installed.

Disengage blades and stop engine before leaving tractor seat to empty containers, unclogging chutes, etc.

Close cover before starting.

Disengage mower when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

Do not attempt to vacuum up cans or other potentially hazardous projectiles.

10

Image 10
Contents Assembly Operation Customer Responsibilities Repair Parts II. Slope Operation Safe Operation Practices for Ride-On MowersGeneral Operation III. ChildrenTable of Contents Know Your Grass Catcher Carton ContentsTools Required for Assembly Unpacking InstructionsDrawbar a See Figs A, 1B & 1C AssemblyBagger Support Assembly Drawbar B See DSupport Assembly See Fig Container Assembly See FigWith Rear Gauge Wheels Container Mounting See FigMounting TAB See a WithoutMounting TAB See B With Rear WithoutUpper Chute See Figs a & 6B Level MowerOperation Tips for Improved Bagging OperationCustomer Responsibilities MAINTENANCE,SERVICE or Adjust MentsBlade Care Repair PARTS/PIÈCES DE Rechange KEY Part Description

402337, 960 72 00-07, QCT342 specifications

The Poulan 960 72 00-07,402337,QCT342 is a versatile and powerful piece of equipment designed for both professional landscapers and home gardening enthusiasts. This model, part of Poulan's robust lineup of outdoor power tools, combines innovative technologies with user-friendly features to enhance efficiency and performance.

One of the standout features of the Poulan 960 72 00-07,402337,QCT342 is its reliable engine. Equipped with a high-performance gas engine, this tool delivers impressive power, making it suitable for a variety of tasks, from trimming hedges to clearing brush. The engine is designed to minimize emissions and improve fuel efficiency, aligning with modern environmental standards.

The ergonomic design of the Poulan 960 72 00-07,402337,QCT342 is another highlight. It features padded grips and a balanced frame that reduces user fatigue, allowing for extended use without discomfort. The lightweight construction contributes to its ease of maneuverability, making it ideal for both detailed work and larger projects.

This model incorporates advanced cutting technologies, which enable clean and precise cuts. The blades are crafted from high-quality materials, ensuring longevity and sharpness over time. Additionally, the adjustable cutting height feature allows users to customize their experience based on the specifics of the task at hand.

Safety is a crucial consideration in any outdoor power tool, and the Poulan 960 72 00-07,402337,QCT342 excels in this regard. It comes with safety features such as a reliable brake system and an easy-to-use throttle control. These features not only enhance user safety but also promote a seamless operation experience.

Ease of maintenance is also a key characteristic of this model. The design allows for quick access to vital components, making it straightforward for users to perform regular checks and maintenance tasks. This simplicity not only extends the life of the tool but also ensures optimal performance with minimal effort.

In conclusion, the Poulan 960 72 00-07,402337,QCT342 is a reliable, efficient, and user-friendly tool that meets the diverse needs of garden care and landscaping. With its powerful engine, ergonomic design, advanced cutting technologies, safety features, and ease of maintenance, it is an excellent choice for anyone looking to invest in a high-quality outdoor power tool. Whether for professional use or DIY projects, this model promises to deliver exceptional results.