t
7.2 Using the tape unit
Warning: Always press the STOP / EJ but- ton first and let the tape stop before you switch modes. This will prevent damage and the device wearing out prematurely.
The button symbols mean the following for tape mode:
PLAY = play a tape
❙❙PAUSE = stop/start pause >> FFWD = fast forward
<< REW = rewind
●RECORD = record
■STOP/EJ = stop and eject tape
The tape stops automatically at the end of the tape. Remove the tape, turn it over, and replace to play or record on the other side!
7.3 Recording from the radio
Select "RADIO" on the FUNCTION switch .
When you find a radio station you want to record from:
●Press RECORD to start recording.
❙❙Press PAUSE to pause the recording.
■Press STOP/EJ to stop recording.
Note: The recording volume is controlled automatically and is not determined by the volume control switch.
7.4 Recording from CD
Select the "CD" FUNCTION switch.
●Press RECORD and simultaneously ...
❙❙the PAUSE key . The device is now rea dy to record.
Press PAUSE (deactivate) again as soon as the CD is started.
Press PAUSE again to interrupt recor ding.
■Press STOP/EJ to stop recording.
Note: The recording volume is controlled automatically and is not determined by the volume control switch.
8.Cleaning and maintenance
Never open the device housing. There are no operating elements inside. An opened device housing could cause potential life endangerment through electric shock.
Before cleaning the outside of the device,
…
•First remove the mains connector from the mains socket.
Select the "TAPE" FUNCTION to order to switch the device off.
•If batteries are installed, remove them. This may cause some or all preset radio stations to be lost!
•Close all openings, i.e. the battery com- partment, tape and CD trays.
8.1 External cleaning
•Clean all outside surfaces with a moist but not wet cloth.
•Do not use any sort of aggressive clea- ning fluids. These could damage the external plastic housing.
9
