t
CD Stereo Radiorecorder
e-bench KH 2264
1. Intended use | 2. Technical data |
|
This appliance is designed for casual | Voltage: | 230 V / 50 Hz |
Power consumption (rating): | 12W | |
use or for use in a commercial or industrial | Laser class: | 1 |
context. |
|
|
Important safety information!
To avoid fatal danger through electric
shocks:
•Make sure that the power cable does not get wet or damp during operation. Install the cable so that it cannot be crushed between two objects, or damaged in any other way. Should the power cable be damaged, please let our customer servi- ce replace it before using the appliance again.
•Disconnect the power cable from the power supply after using the appliance. Switching the device off is not sufficient as voltage remains in the device for as long as it is connected to the mains power supply.
•Make sure that no fluids or small objec- ts penetrate the interior of the device.
•Only use the device in dry surroundings
To avoid fire hazard and the danger of
injuries:
•Install the device in a position where the- re is no danger of heat build up - deta- ched and well ventilated. Never cover the ventilation slits!
•Avoid additional heat through direct sun, heating systems, other electrical appliances etc.
•Never let children and frail people handle the device without supervision, as these people may not always judge potential dangers appropriately.
•The CD unit has a "class 1" laser unit. There is no immediate danger for your eyes unless the housing is incomplete or damaged - if this is the case, then the appliance must not be used at any time!
Please keep this manual in case of future queries –
and pass it on when transcribing the device to another person!
4
