Poulan 191713 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 13)

Mower will be easier to remove from the right side of trac- tor.

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Remove small retainer spring, and remove clutch spring off pulley bolt.

Remove large retainer spring, slide collar off and push housing guide out of bracket.

Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs.

Disconnect front links from deck by removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 13)

Raise attachment lift lever to its highest position.

Slide mower under tractor with deflector shield to right side of tractor.

Lower lift lever to its lowest position.

Connect front links to mower deck and secure with retainer springs.

Connect suspension arms to rear deck brackets and secure with retainer springs.

Connect anti-swaybar to chassis bracket and secure with retainer spring.

SMALL

RETAINER SPRING

FLAT WASHER

CLUTCH SPRING

SUSPENSION ARMS

SQUARE HOLE

SMALL RETAINER SPRING

ENGINE PULLEY

 

CLUTCH SPRING

FRONT LINK

RETAINER SPRING

ANTI-SWAY BAR

RETAINER SPRINGS

 

(BOTH SIDES)

COLLAR

 

HOUSING GUIDE

LARGE RETAINER

02695

DEFLECTOR SHIELD

 

SPRING

 

 

 

 

BRACKET

 

FIG. 13

18

Image 18
Contents Model NO. PO15538C General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETires TractorBrake Operation Operator Presence SystemBelts BatteryEngine Transaxle CoolingAIR Filter CleaningClean AIR Screen MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing Battery See FigsTo Replace Headlight Bulb To Replace FuseTo Adjust Choke Control To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

191713 specifications

The Poulan 191713 is a powerful and versatile chainsaw designed for both homeowners and professionals who require a reliable cutting tool for various applications. Known for its robust performance and user-friendly features, it has garnered a reputation for dependability in the realms of tree trimming, firewood cutting, and outdoor maintenance.

One of the standout features of the Poulan 191713 is its efficient two-cycle engine, delivering exceptional power while maintaining a lightweight profile. This allows users to handle the chainsaw comfortably for extended periods without experiencing fatigue. The engine is designed for easy starting, thanks to the Smart Start technology, which reduces the amount of effort needed to pull the starter cord. This aspect is particularly beneficial for novice users or those who may not have much experience with chainsaws.

The 191713 incorporates a 16-inch bar and chain, providing a perfect balance between cutting capacity and maneuverability. This size is ideal for tackling medium-sized logs and branches with ease, making it a versatile choice for various cutting tasks. The chainsaw also features an automatic oiling system, ensuring that the chain is consistently lubricated during operation. This not only enhances cutting efficiency but also prolongs the life of the chain and bar.

In terms of safety, the Poulan 191713 is equipped with essential features such as a chain brake, which helps prevent accidents by stopping the chain quickly in case of kickback. Additionally, the chainsaw’s ergonomic handle provides a secure and comfortable grip, further promoting safe operation. The lightweight design and well-placed controls also contribute to user comfort, making it easier to navigate around obstacles during cutting tasks.

Maintenance is simplified with the Poulan 191713, as it includes easily accessible air filters and spark plugs. This facilitates quick cleaning and replacement, ensuring that the chainsaw remains in optimal working condition.

In summary, the Poulan 191713 is a well-engineered chainsaw that blends power, ease of use, and safety features. With its reliable performance and practical technologies, it stands out as an excellent tool for anyone looking to manage their outdoor space efficiently. Whether you are a seasoned professional or a weekend warrior, the Poulan 191713 is designed to meet your cutting needs effectively.