Product Specifications

•Never attempt to make wheel height adjustments while the engine is running.

•Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check compo- nents and replace with manufacturer’s recommended parts, when necessary.

•Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

•Do not change the engine governor set- ting or overspeed the engine.

•Maintain or replace safety and instruc- tion labels, as necessary.

WARNING:This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting ap- plicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the mufﬂer is available through your nearest authorized service center.

Gasoline Capacity / Type:	1.0 Quarts (0,94 Litres) Unleaded Regular

Oil Capacity:	20 Ounces (0,58 Litres)

Oil Type (API SG–SL):	SAE 30 (above 0°C/32°F); SAE 5W-30 (below 0°C/32°F)

Spark Plug:	Champion RJ19LM (Gap: 0.30" / 0,76 mm)

Blade Bolt Torque:	35-40 ft. lbs. (47-54 N-m)

Parts Bag contents (shown full size)

Lower Handle

(4) Hex Head

Bolts 3/8-16 x 3/4 (4) Washers (4) Flangelock Nuts

Upstop Bracket

(1)Hex Washer Head Self-Tapping Screw

#10-24 x 1/2

Rope Guide

(1)Locknut 1/4-20

Upper Handle

Discharge Guard

(2) Hex Head Bolts 1/4-20 x 1-1/2 (2) Locknuts

(2) Hex Head	(2) Nylock
Bolts 1/4-20	(2) Washers Nuts 1/4-20

Wheels

(4)

(4) Shoulder Bolts	Locknuts	(4) Spacers 1"
	3/8-16		(2) Washers 1-1/4"