Poulan 2001-01, 177110 owner manual Table of Contents

Page 2

TABLE OF CONTENTS

Safety Rules

2

Maintenance

16

Product Specifications

5

Service and Adjustments

20

Assembly

7

Storage

25

Operation

10

Troubleshooting

26

Maintenance Schedule

16

Repair Parts

30

 

 

Warranty

46

SAFETY RULES

IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

OPERATION

DOWN HILL,

I. GENERAL OPERATION

Read, understand, and follow all instructions in the manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless abso- lutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower- related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from

serious injury.

II. SLOPE OPERATION

Slopes are a major factor related to loss-of- control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer’s recommen- dations for wheel weights or counter- weights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless neces- sary, and then, turn slowly and gradu- ally downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE

NOT ACROSS HILL

ONLY RIDE UP AND

 

LINES

 

ON

DOTTED

SLOPE

15

 

OUT

°

 

IS

 

 

A

 

CUT

THIS

 

GUIDE

SIGHTING

SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE.

15° MAX.

Operate your Tractor up and down the face of slopes (not greater than 15°), never across the face. Make turns gradu- ally to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes.

2

47

Image 2
Contents Modelno Table of Contents IV. Service III. ChildrenWash hands after handling Tractor -- Model NumberMower Deck KEY Part DescriptionProduct Specifications Customer ResponsibilitiesSeat Lift AssemblyUnassembled Parts KEY Part NO. NO. DescriptionHOW to SET Upyour Tractor AssemblyTools Required for Assembly To Removetractor from CartonDecals Install SeatWheels and Tires KEY PartCheck for Proper Position of ALL Belts Seat AssemblyTractor -- Model Number Check Tire Pressure Check Deck LevelnessEngine KEY Part NO. no DescriptionOptional Equipment Tractor -- Model Number KnowyourtractorYour Tractor Spark ArresterHOW to Useyour Tractor To Operate Mower Steering To Adjust Mower Cutting HeightTo Operate on Hills To TransportCheck Engine OIL Level Before Starting the EnigneTo Start Engine ADD GasolineTractor -- Model Number Mowing Tips Always operate engine at full throttleChassis and Enclosures MaintenanceLubrication Chart General RecommendationsTractor Transaxle Cooling EngineBelts LubricationAIR Filter Clean AIR ScreenEngine Cooling Fins MufflerSchematic Service and AdjustmentsCleaning To Install MowerTo Level Mower Housing Troubleshooting ChartProblem Cause Correction To Replace Mower Blade Drive Belt To Adjust BrakeTo Adjust Steering Wheel ALIGN- Ment To Replace Motion Drive BeltFront Wheel TOE-IN/CAMBER To Start Engine with a Weak BatteryReplacing Battery To Remove Wheel for RepairsStorage To Adjust CarburetorBattery Other

177110, 2001-01 specifications

The Poulan 2001-01,177110 is a powerful and efficient chainsaw designed for various cutting tasks, ranging from light home use to moderate professional applications. A combination of high-performance features and user-friendly design makes it an excellent choice for both novice and experienced users. The chainsaw boasts a robust engine that delivers impressive horsepower, enabling it to handle tougher cutting jobs with ease.

One of the key features of the Poulan 2001-01,177110 is its lightweight and ergonomic design, which enhances user comfort and reduces fatigue during extended use. The chainsaw is equipped with a well-balanced frame that promotes improved maneuverability, allowing users to move easily while cutting. Additionally, the anti-vibration handle helps reduce the amount of vibration felt by the operator, further enhancing comfort during operation.

Powering the Poulan chainsaw is a reliable gas engine that provides consistent performance in various conditions. With features such as an easy-start system, users can quickly get the chainsaw running with minimal effort, making it particularly appealing for those who may be intimidated by traditional starting procedures. The engine is also designed for fuel efficiency, allowing for longer run times between refueling.

The Poulan 2001-01,177110 incorporates a 16-inch bar and chain, providing ample cutting capacity for a range of tasks including trimming branches, cutting firewood, and felling small trees. The chain is designed for sharp cutting and durability, ensuring that users can work effectively without frequent replacements or maintenance. Additionally, the automatic oiler system helps maintain proper lubrication of the chain, promoting prolonged lifespan and reduced maintenance needs.

Safety is a top priority with the Poulan chain saw, as it features a chain brake that can immediately stop the chain in case of kickback. The front handguard is another important safety element that protects the user's hands while operating the chainsaw. Overall, the Poulan 2001-01,177110 stands out for its combination of power, lightweight design, and safety features, making it a popular choice for anyone in need of a versatile and reliable chainsaw for yard work or light professional applications.