Tools Required for Assembly, Unpack Carton

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)	5/16" wrench	Utility knife
(2)	7/16" wrenches	Tire pressure gauge
(2) 1/2" wrenches		Pliers
(1)	9/16" wrench

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

TO CHECK BATTERY (See Fig. 1)

•Lift seat to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions).

•For battery and battery cable installation see "RE- PLACING BATTERY" in the "Service and Adjustments" section in this manual.

SEAT

LABEL

02602

Fig. 1

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 2)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSERT

BOLT

LOCK

WASHER

LARGE FLAT

WASHER

STEERING

WHEEL

STEERING

BOOT

ADAPTER

	LOWER	EXTENSION
	LOWER	SHAFT
	STEERING	SHAFT
	SHAFT

Fig. 2

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

96012011200, PO14542LT, 438511 specifications

The Poulan PO14542LT is a powerful and versatile lawn tractor designed to make yard care easier for homeowners. With its robust features and advanced technologies, this ride-on mower stands out as an excellent choice for those managing medium to large-sized lawns.

One of the main features of the Poulan PO14542LT is its 14.5 horsepower Briggs & Stratton engine. The engine provides reliable power to tackle tough mowing tasks, ensuring efficient cutting and handling of overgrown grass. Coupled with an automatic transmission, the tractor allows for smooth speed adjustments without the need for manual gear shifting, enhancing user convenience and comfort.

The cutting deck is another standout characteristic of the PO14542LT. With a 42-inch width, the deck is designed to deliver a clean and even cut, helping to reduce the number of passes required on your lawn. It also features a 3-in-1 cutting system that allows users to choose between mulching, bagging, or side discharge options, providing flexibility based on the specific needs of the lawn.

In terms of ergonomics, the Poulan PO14542LT is designed with the user in mind. The high-back seat provides comfort during long mowing sessions, while the easy-to-reach controls allow for effortless operation. The steering wheel is designed for ease of maneuverability, making it simple to navigate around obstacles in the yard.

Safety is a priority in the design of this tractor. The PO14542LT comes equipped with a safety switch that ensures the engine will shut off if the operator leaves the seat while the mower is engaged. Additionally, the tractor includes oversized batteries and an efficient fuel economy, allowing for extended operation between refuels.

Poulan also incorporates advanced technologies into the PO14542LT. The dual-blade cutting system enhances grass chopping capabilities, promoting healthier lawn growth by finely cutting the grass clippings that are returned to the soil. This, combined with the mulching capability, supports environmentally friendly yard maintenance.

In conclusion, the Poulan PO14542LT is an impressive lawn tractor that excels in performance, comfort, and versatility. Its combination of power, user-friendly features, and safety mechanisms makes it an ideal companion for homeowners seeking to achieve a beautifully maintained lawn with minimal effort. Whether it’s routine mowing or tackling tougher terrains, the PO14542LT proves to be a reliable choice for any lawn care endeavor.