Poulan 438495, PO19542LT manual Reverse Operation System ROS, To Operate on Hills, To Transport

Page 12

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Depress clutch/brake pedal all the way down and hold.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before backing.

•Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sens- ing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES (See Fig. 6)

Disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

Fig. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PO19542LT ModelSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyToremovetractorfromcarton Before Removing Tractor from SkidTo Check Battery See Fig Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsChecklist Operation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionExcessive Limited Warranty Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service
Related manuals
Manual 20 pages 23.31 Kb

96012011100, PO19542LT, 438495 specifications

The Poulan PO19542LT, model number 96012011100, is a robust and reliable lawn tractor designed to meet the diverse needs of homeowners and landscaping enthusiasts alike. This powerful machine stands out in the crowded market of lawn care equipment, thanks to its advanced features, durable construction, and user-friendly operation.

At the heart of the Poulan PO19542LT is a reliable, efficient engine that provides the necessary power to tackle tough mowing tasks. The engine is designed to deliver consistent performance while ensuring optimal fuel efficiency. With a cutting width of 42 inches, this lawn tractor enables users to cover large areas in fewer passes, significantly reducing the time spent mowing lawns.

One of the key features of the Poulan PO19542LT is its hydrostatic transmission, which provides seamless speed adjustment and enhances maneuverability. This technology allows users to easily navigate around obstacles, making it an ideal choice for yards with intricate landscaping. Additionally, the responsive steering and tight turning radius further enhance handling and control, offering a more enjoyable mowing experience.

The cutting deck of the PO19542LT is another highlight, featuring a durable steel construction that can withstand the rigors of regular use. The deck also comes equipped with multiple cutting heights, allowing users to choose the desired grass length for a clean, well-manicured lawn. Furthermore, the deck's design promotes effective grass discharge, whether through side discharge, mulching, or bagging, catering to various lawn care preferences.

Comfort is paramount in lawn maintenance, and Poulan addresses this with an ergonomic seat and easy-to-reach controls. The high-back seat offers ample support for long mowing sessions, while the spacious foot area allows users to work comfortably without feeling cramped.

Safety features are integral to the design of the Poulan PO19542LT, ensuring that users can operate the tractor without unnecessary risk. The presence of safety switches and guards ensures that the machine operates only when the operator is securely seated, further enhancing safety during operation.

In conclusion, the Poulan PO19542LT, 96012011100, 438495 is a versatile lawn tractor that combines power, efficiency, and user comfort. With its advanced hydrostatic transmission, sturdy construction, and multiple cutting options, this model is designed to make lawn care tasks easier and more efficient. Whether you're maintaining a small residential yard or larger lawns, the Poulan PO19542LT is well-equipped to deliver outstanding performance and results.
Top Page Image Contents