Poulan PO19542LT, 438495, 96012011100 manual Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig

Page 22

SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL- ADJUSTMENT (See Fig. 20)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral (N) posi- tion.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 20

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 21

TO START ENGINE WITH A WEAK BATTERY (See Fig. 22)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 21)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

22

Fig. 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PO19542LT ModelGeneral Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelToremovetractorfromcarton AssemblyTools Required for Assembly Before Removing Tractor from SkidCheck Deck Levelness To Check Battery See FigCheck Tire Pressure Check for Proper Position of ALL BeltsChecklist Operation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate on Hills Towing Carts and Other ATTACH- MentsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips General Recommendations MaintenanceMaintenance ScheduleBlade Care BatteryTractor Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionExcessive Limited Warranty Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service
Related manuals
Manual 20 pages 23.31 Kb

96012011100, PO19542LT, 438495 specifications

The Poulan PO19542LT, model number 96012011100, is a robust and reliable lawn tractor designed to meet the diverse needs of homeowners and landscaping enthusiasts alike. This powerful machine stands out in the crowded market of lawn care equipment, thanks to its advanced features, durable construction, and user-friendly operation.

At the heart of the Poulan PO19542LT is a reliable, efficient engine that provides the necessary power to tackle tough mowing tasks. The engine is designed to deliver consistent performance while ensuring optimal fuel efficiency. With a cutting width of 42 inches, this lawn tractor enables users to cover large areas in fewer passes, significantly reducing the time spent mowing lawns.

One of the key features of the Poulan PO19542LT is its hydrostatic transmission, which provides seamless speed adjustment and enhances maneuverability. This technology allows users to easily navigate around obstacles, making it an ideal choice for yards with intricate landscaping. Additionally, the responsive steering and tight turning radius further enhance handling and control, offering a more enjoyable mowing experience.

The cutting deck of the PO19542LT is another highlight, featuring a durable steel construction that can withstand the rigors of regular use. The deck also comes equipped with multiple cutting heights, allowing users to choose the desired grass length for a clean, well-manicured lawn. Furthermore, the deck's design promotes effective grass discharge, whether through side discharge, mulching, or bagging, catering to various lawn care preferences.

Comfort is paramount in lawn maintenance, and Poulan addresses this with an ergonomic seat and easy-to-reach controls. The high-back seat offers ample support for long mowing sessions, while the spacious foot area allows users to work comfortably without feeling cramped.

Safety features are integral to the design of the Poulan PO19542LT, ensuring that users can operate the tractor without unnecessary risk. The presence of safety switches and guards ensures that the machine operates only when the operator is securely seated, further enhancing safety during operation.

In conclusion, the Poulan PO19542LT, 96012011100, 438495 is a versatile lawn tractor that combines power, efficiency, and user comfort. With its advanced hydrostatic transmission, sturdy construction, and multiple cutting options, this model is designed to make lawn care tasks easier and more efficient. Whether you're maintaining a small residential yard or larger lawns, the Poulan PO19542LT is well-equipped to deliver outstanding performance and results.
Top Page Image Contents