Poulan 96042011000, PB26H54YT manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 9

ASSEMBLY

9INSTALL BELT ON ENGINE CLUTCH PULLEY (M) (See Fig. 7 & 15)

•Disengage belt tension rod (K) from locking bracket (L).

•Install belt onto engine clutch pulley (M).

M

M.ENGINE

CLUTCH PULLEY

Fig. 15

IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers.

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operat- ing mower as shown in the Operation section of this manual.

MOWER DRIVE BELT INSTALLATION

Follow procedure described in “TO REPLACE MOWER BLADE DRIVE BELT ” in the "Service and Adjustments" section of this manual.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before operat- ing your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PB26H54YT Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Mower Mower Front Wheel Unassembled PartsTools Required for Assembly AssemblyToremovetractorfromcarton Before Removing Tractor from SkidInstall ANTI-SWAY BAR S if Equipped See Turn Steering Wheel Left and Position Mower See FigANTI-SWAY BAR S Attach Mower Side Suspension Arms a to Chassis See Fig Attach Rear Lift Links C See FigAttach Front Link E See Fig Check Tire Pressure Install Belt on Engine Clutch Pulley M SeeCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorStopping See Fig To USE Throttle Control D See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo USE Cruise Control J See Fig To Operate MowerBefore Starting the Engine To Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig To Install Mower Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See FigTo Level Mower To Check Brake To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Remove Wheel See FigReplacing Battery See Fig To Start Engine with a Weak Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTransmission Other StorageFuel System Engine OILProblem Cause Correction TroubleshootingBattery will not To run when operFires when turn Engine continuesSuggested Guide for Sighting Slopes for Safe Operation Limited Warranty

433432, PB26H54YT, 96042011000 specifications

The Poulan PB26H54YT, model number 96042011000, is a versatile and powerful lawn tractor designed for homeowners seeking a reliable solution for their yard maintenance needs. This lawn tractor stands out in the market for its combination of features, technological advancements, and user-friendly characteristics, making it an excellent choice for both novice and experienced users.

One of the main features of the PB26H54YT is its robust 26-horsepower engine. This powerful engine ensures that the tractor can handle a variety of tasks, from mowing to towing, without sacrificing performance. The engine is paired with a hydrostatic transmission, allowing for smooth and effortless speed adjustments. This feature is particularly advantageous for navigating complex landscapes, as it provides precise control over speed and direction.

The PB26H54YT is equipped with a 54-inch cutting deck, which enables users to mow large areas efficiently. The cutting deck design includes reinforced edges, enhancing durability and preventing wear over time. Additionally, the deck is adjustable, allowing users to select the desired cutting height for their specific grass type and growth conditions. This adaptability ensures a clean and professional-looking cut every time.

Another noteworthy characteristic is the tractor's ease of operation. The intuitive control panel includes a comfortable seat with a high backrest, providing excellent support during long mowing sessions. The steering wheel is ergonomically designed for user comfort, while the pedal-operated transmission enhances maneuverability. Users will also appreciate the electric start feature, which eliminates the need for pull cords, making starting the engine a breeze.

Safety is a top priority with the PB26H54YT, as it is equipped with essential safety features such as a cut-off switch that activates when the operator leaves the seat. This feature helps prevent accidents, providing peace of mind to users while operating the tractor. Additionally, the wide rear tires offer enhanced traction, ensuring stability on uneven terrain, which is a common challenge in many yards.

Overall, the Poulan PB26H54YT,96042011000,433432 combines power, efficiency, and user-centered design, making it an ideal solution for residential lawn care. Whether it's mowing, hauling, or handling other yard tasks, this lawn tractor is built to deliver reliability and performance, ensuring that your lawn remains well-maintained all season long.
Top Page Image Contents