Uniden HH940P manual Operation, Setting the Squelch, volume button

Page 10

Operation

Operation

☞When you press any key (except PTT), a short tone sounds.

☞Whenever you turn on your HH940P, it is tuned to channel 16 – the United States Coast Guard frequency for distress, safety, and calling.

☞See the foldout in the front of the operating guide for button and key positions.

Setting the Squelch

1. To turn the unit on, press and hold the power button for

2.0 seconds.

2.Use the volume and chan buttons to adjust the volume to a comfortable level.

3.Press the

volume button.

Press ▲ on the chan button to adjust the volume up.

Press ▼ on the chan button to adjust the volume down.

Press volume to finish.

☞Before setting the squelch control on your marine radio, you must select a channel that is not in use.

4.Use the squelch and chan buttons to adjust the squelch to the desired level. Think of the squelch control as a gate.

Press the squelch button.

8

Image 10

Contents UTZZ01865AZ Nickel-CadmiumBattery Pack Warning squelch Controls and Indicatorsvolume scan/memCONTENTS Technical Support and Service FeaturesIntroduction Maritime Radio Services Operation Mounting the Drop-inCharger Getting StartedAttaching the Antenna Attaching the Battery Pack Charging the Battery Pack1. Place the HH940P in the drop-incharger The charger won’t overcharge the battery pack2. The red LED lights and stays on Operation Setting the Squelchvolume button Press the squelch button when finished way shutSelecting a Channel One-touchChannel 16/9Monitoring Weather Channels Triple WatchScanning To Program a Channel into MemoryTo Delete a Channel from Memory Triple Watch in Scan ModeKey Lock Frequency MHz Marine Channels - USAChannel Traffic TypeFrequency Mhz Marine Channels - InternationalChannel Type OfShip Marine Channels - CanadianType Of ShipFrequency Mhz Marine Channels - Canadian, contChannel Type OfTransmitter SpecificationsGeneral ReceiverThree-yearLimited Warranty UTZZ01865AZ