Uniden HH940P manual way shut, Press the squelch button when finished

Page 11

Press and hold ▲ on the chan button to adjust the “squelch gate” so high that no signals get through.

5.Press and hold ▼ on the chan button to adjust the “squelch gate” so everything gets through – noise, weak signals, and strong signals.

6. To set the “squelch gate” to the desired level, press and hold ▲ on the chan button until the gate is all the

way shut.

Press ▼ repeatedly until you just hear noise. Then press ▲ on the chan button repeatedly until the noise just stops. Now only strong signals get through.

Press the squelch button when finished.

Image 11

Contents UTZZ01865AZ Nickel-CadmiumBattery Pack Warning scan/mem Controls and Indicatorsvolume squelchCONTENTS Introduction FeaturesTechnical Support and Service Maritime Radio Services Operation Attaching the Antenna Getting StartedMounting the Drop-inCharger Charging the Battery Pack Attaching the Battery Pack2. The red LED lights and stays on The charger won’t overcharge the battery pack1. Place the HH940P in the drop-incharger volume button Setting the SquelchOperation way shut Press the squelch button when finishedOne-touchChannel 16/9 Selecting a ChannelTriple Watch Monitoring Weather ChannelsTriple Watch in Scan Mode To Program a Channel into MemoryTo Delete a Channel from Memory ScanningKey Lock Traffic Type Marine Channels - USAChannel Frequency MHzType Of Marine Channels - InternationalChannel Frequency MhzShip Marine Channels - CanadianType Of ShipType Of Marine Channels - Canadian, contChannel Frequency MhzReceiver SpecificationsGeneral TransmitterThree-yearLimited Warranty UTZZ01865AZ