Poulan PC1538A Muffler, AIR Filter See Fig, Spark Plugs, IN-LINE Fuel Filter See Fig, Cleaning

Page 17

CUSTOMER RESPONSIBILITIES

SCREWS

BLOWER

COVER

 

KNOB

 

 

HOUSING

 

 

 

 

 

 

SCREWS

 

 

 

 

CARTRIDGE

 

 

COVER

NUT

 

AIR SCREEN

 

PAPER

OIL FILL

 

 

 

 

CARTRIDGE

TUBE

 

FOAM

 

ASSEMBLY

 

 

 

PRE-CLEANER

 

 

 

 

 

 

 

BASE

 

SPARK

FIG. 13

 

MUFFLER

ENGINE COOLING FINS

PLUG

 

Inspect and replace corroded muffler and spark arrester (if

 

 

 

 

 

FIG. 12

equipped) as it could create a fire hazard and/or damage.

AIR FILTER (See Fig. 13)

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

•Remove knob(s) and cover.

TO SERVICE PRE-CLEANER

•Slide foam pre-cleaner off cartridge.

•Wash it in liquid detergent and water.

•Squeeze it dry in a clean cloth.

•Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

•If very dirty or damaged, replace pre-cleaner.

•Reinstall pre-cleaner over cartridge.

•Reinstall cover and secure with knob(s).

TO SERVICE CARTRIDGE

•Remove cartridge nut.

•Carefully remove cartridge to prevent debris from enter- ing carburetor. Clean base carefully to prevent debris from entering carburetor.

•Clean cartridge by tapping gently on flat surface. If very dirty or damaged, replace cartridge.

•Reinstall cartridge, nut, precleaner, cover and secure with knob(s).

IMPORTANT: PETROLEUM SOLVENTS, SUCH AS KEROSENE, ARE NOT TO BE USED TO CLEAN THE CARTRIDGE. THEY MAY CAUSE DETERIORATION OF THE CARTRIDGE. DO NOT OIL CARTRIDGE. DO NOT USE PRESSURIZED AIR TO CLEAN OR DRY CARTRIDGE.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 14)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

CLAMP

FUEL

FILTER

FIG. 14

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in a shortened engine life.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model NO. PC1538A IV. Service Safety RulesGeneral Operation II. Slope OperationSafe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Steering Wheel Unassembled PartsTools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelTo Start Engine See Fig Mowing TipsADD Gasoline Service Dates Lubrication ChartCustomer Responsibilities General RecommendationsBrake Operation TractorTires Operator Presence SystemEngine Muffler CleaningAIR Filter See Fig Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalFront Wheel TOE-IN/CAMBER To Adjust Brake See FigTo Adjust Steering Wheel Alignment Replacing Battery See Figs To Start Engine with a Weak Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Replace Headlight Bulb To Adjust CarburetorInterlocks and Relays To Replace FuseOther StorageFuel System Engine OILTroubleshooting Points OFF Service Notes Tractor - Model Number PC1538A, Product Number 954 56 SchematicElectrical KEY Part Description Chassis Repair Parts Drive Transaxle See Breakdown Steering 140044X428 Wheel Steering 175131 Axle Asm Optional Equipment 170551 Control Th/ch Flag Seat Wheels & Tires DecalsLSB42 LBD48Mower Lift 159460 Wire Asm Inner/Sprg w/plunger Mower Deck Repair Parts Service Notes Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

PC1538A specifications

The Poulan PC1538A is a versatile and reliable gas-powered chainsaw designed for homeowners and outdoor enthusiasts looking to tackle a variety of cutting tasks. With a focus on user-friendliness and efficient performance, this model stands out for its robust features and innovative technologies.

One of the primary characteristics of the PC1538A is its powerful 38cc two-stroke engine. This engine provides a balance of power and economy, enabling users to handle everything from light pruning to larger cutting jobs with ease. The engine is designed for optimal fuel efficiency while maintaining a solid power output, ensuring that users can work longer without frequent refueling.

The 15-inch bar and chain setup of the PC1538A is ideal for making quick cuts in relatively small to medium-sized wood, making it a perfect choice for backyard projects, cutting firewood, and managing fallen branches. The chainsaw's low-kickback chain further enhances safety for the user, allowing for more controlled cuts without the risk of unintended recoil.

Ergonomic design is another hallmark of the Poulan PC1538A, featuring a lightweight frame that is easy to maneuver. The comfortable grip handle reduces vibration, making prolonged use more tolerable and less strenuous on the hands and arms. This thoughtful design consideration allows users to maintain better control over the tool, leading to more precise cutting.

In terms of maintenance, Poulan has integrated several user-friendly features into the PC1538A. The tool-less chain tensioning system allows for quick adjustments to the chain tension, ensuring optimal performance without the need for additional tools. An easy-access air filter simplifies routine maintenance, enabling users to keep the engine running smoothly with minimal effort.

Additionally, the chainsaw incorporates technologies such as a primer bulb to facilitate easier starts, especially after long periods of inactivity. The automatic oiler system ensures proper lubrication of the chain and bar during operation, extending the life of the accessory components and maintaining cutting efficiency.

Overall, the Poulan PC1538A combines its powerful engine, ergonomic design, and thoughtful features to provide a reliable tool for a range of cutting tasks. Whether you are a novice or an experienced user, this chainsaw offers performance and efficiency, making it an excellent addition to any outdoor toolkit.
Top Page Image Contents