Poulan PO1742STB manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig

Page 7

ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model NO. PO1742STB Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine See Fig Mowing TipsBefore Each USE MaintenanceLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenEngine BeltsSpark Plugs CleaningEngine Cooling Fins See Fig MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust BrakeTo Attach Jumper Cables To Adjust Steering Wheel ALIGN- MentReplacing Battery See Figs Front Wheel TOE-IN/CAMBERTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Service Notes Tractor - Model Number PO1742STB SchematicElectrical KEY Part Description Chassis and Enclosures 179101 170 173937 DriveSteering Assembly 186737 Optional Equipment EngineSeatlt.bolt1 Seat AssemblyWheels & Tires DecalsMower Lift Mower Deck 153535 Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

PO1742STB specifications

The Poulan PO1742STB is a versatile and powerful lawn tractor, designed to provide efficient performance for homeowners seeking to maintain their lawns with ease. Equipped with a robust 17.5-horsepower Briggs & Stratton engine, the PO1742STB delivers reliable starting and ample power for tackling a variety of yard tasks. This engine is engineered for durability and efficiency, ensuring that users can depend on it season after season.

One of the standout features of the Poulan PO1742STB is its 42-inch cutting deck. This mid-size deck is perfect for a range of lawn sizes, allowing for efficient mowing without compromising on maneuverability. The cutting height can be easily adjusted with a convenient lever, providing users the flexibility to choose the optimal grass length for their lawns. The deck is designed with durable materials to withstand wear and tear, ensuring longevity and consistent performance.

In terms of technology, the PO1742STB is equipped with an automatic transmission system, allowing for smooth transitions between speeds. This feature enables users to focus on their mowing without the distraction of manually shifting gears, enhancing the overall mowing experience. The consumer-friendly layout of the controls makes it accessible for lawn care enthusiasts of all skill levels.

Another noteworthy characteristic of the Poulan PO1742STB is its ergonomic design. The seat is cushioned and adjustable, providing comfort during extended mowing sessions. Additionally, the placement of the controls is thoughtfully engineered to reduce strain on the operator, making lawn maintenance less of a chore.

For added convenience, the PO1742STB also highlights a large grass catcher attachment. This accessory aids in collecting grass clippings and debris, making cleanup a breeze and contributing to a neat and polished lawn appearance.

Overall, the Poulan PO1742STB combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to invest in a reliable lawn tractor. With its innovative technologies and thoughtful design, it ensures that lawn care is manageable and effective, allowing users to enjoy their outdoor spaces to the fullest.
Top Page Image Contents