Poulan PPR20H42STA To Start Engine with a Weak Battery See Fig, Replacing Battery See Figs

Page 24

SERVICE AND ADJUSTMENTS

TO START ENGINE WITH A WEAK BATTERY (See Fig. 28)

WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Customer Responsibili- ties section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

REPLACING BATTERY (See Figs. 29 and 30)

CAUTION: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

•Lift seat pan to raised position.

•Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

•Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

FIG. 29

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

TERMINAL

KEPS

NUT

COVER

 

HEX

BOLT

FIG. 28

POSITIVE (RED)

NEGATIVE

CABLE

(BLACK) CABLE

FIG. 30

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents PPR20H42STA Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatSlope Sheet Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching Check Tire PressureCheck Deck Levelness To Convert to Bagging or DischargingOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Towing Carts and Other AttachMents Check Engine OIL LevelMowing Tips Purge TransmissionAutomatic Transmission Warm UP Mulching Mowing Tips Lubrication Chart Everybefore Service DatesCustomer Responsibilities General RecommendationsTractor Brake OperationTires Operator Presence SystemEngine Clean AIR Screen Clean AIR INTAKE/COOLING AreasCleaning MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTransmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Replace Headlight Bulb To Attach Jumper CablesTo Adjust Carburetor Interlocks and RelaysTo Replace Fuse Storage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PPR20H42STAElectrical KEY Part Description Chassis Screw Hex Wshd 8-18 x 7/8 Drive KEY Steering Assembly KEY Part NO. NO. Description Seat Assembly Decals Wheels and TiresEngine Optional EquipmentSpark Arrester 170771 Control, Throttle Mower Deck Wheel, Gauge Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PPR20H42STA specifications

The Poulan PPR20H42STA is a powerful and versatile riding lawn mower designed to tackle a variety of mowing tasks efficiently. This model combines user-friendly features with advanced technology, making it an ideal choice for homeowners with medium to large lawns. One prominent feature of the PPR20H42STA is its robust 20 HP Briggs & Stratton engine, which provides ample power to handle thick grass and uneven terrain. The engine is designed for easy starting and minimal maintenance, ensuring that users can quickly get back to mowing without the hassle of complicated upkeep.

One of the standout characteristics of the Poulan PPR20H42STA is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and coverage, allowing the mower to navigate tight spaces while efficiently cutting a larger area in fewer passes. The deck's dual blades promote a clean and even cut, contributing to a healthier lawn. Additionally, the deck height is adjustable, offering six different cutting positions to customize the mowing height according to your preferences and grass type.

The PPR20H42STA features a hydrostatic transmission, providing smooth and seamless speed control. This technology allows users to easily change speeds without the hassle of shifting gears, resulting in a more enjoyable mowing experience. The mower's tight turning radius enhances maneuverability, making it easier to trim around flower beds and trees.

Comfort has also been prioritized in the design of the Poulan PPR20H42STA. An ergonomic, high back seat provides ample support during prolonged use, reducing fatigue. The steering wheel and control levers are positioned for easy access, enabling users to operate the mower with minimal effort.

For added convenience, the Poulan PPR20H42STA includes a built-in storage compartment for tools and small items, ensuring that everything needed for lawn care is within easy reach. The mower also showcases a rugged and durable construction, with a strong chassis built to withstand tough conditions.

Overall, the Poulan PPR20H42STA defines reliability and efficiency in lawn care. Its powerful engine, superior cutting capabilities, and user-friendly design make it a valuable addition to any homeowner's landscaping toolkit. Whether you’re mowing grass or navigating uneven terrain, this mower is designed to deliver outstanding performance every time.
Top Page Image Contents