ASSEMBLY
SEAT |
SWITCH |
PAD |
SLOT |
SEAT |
PAN |
TAPE |
WIRING HARNESS |
Fig. 3
•Lower seat into operating position and sit on seat. Press clutch/brake pedal all the way down. If operating position is not comfortable, adjust seat.
SLOT |
| TAPE | |
PAD |
|
| |
FLAT |
|
| |
WASHER |
|
| |
SEAT PAN |
| ||
BOLT | TAB | ADJUSTMENT | |
HANDLE | |||
|
|
Fig. 4
TO ADJUST SEAT (See Fig. 4):
•Grasp adjustment handle and pull up, slide seat to desired position and release adjustment handle.
NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.
WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a
TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)
•Raise attachment lift lever to its highest position.
•Releaseparkingbrakebydepressingclutch/brakepedal.
•Place freewheel control in "transmission disengaged" position (See “TO TRANSPORT” in the Operation section of this manual).
•Roll tractor forward off skid.
Continue with the instructions that follow.
ASSEMBLE FRONT WHEEL TO MOWER (See Fig. 5)
•Usingshoulderbolt,washerandlocknutfrompartsbag,as- semblefrontwheeltomowerasshown.Tightensecurely.
Fig. 5
TO INSTALL MOWER (See Figs. 6-13)
Be sure tractor is on level surface and engage parking brake.
•Lower attachment lift lever to it's lowest position.
CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position.
•Turn steering wheel to the left as far as it will go and position mower on right side of tractor with deflector shield to the right.
02965
Fig. 6
NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.
• | Slidemowerundertractoruntilitiscenteredundertractor. |
| A |
7 | Fig. 7 |