Poulan PR17542STC To Replace Mower Blade Drive Belt See Fig, To Replace Motion Drive Belt See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 20)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL

Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

• Install new belt in reverse order of removal.

• Remove belt from stationary idler and clutching idler.

• Make sure belt is in all pulley grooves and inside all belt

• Remove belt downward from around engine pulley.

guides.

• Pull belt slack toward rear of tractor. Remove belt

• Install mower in reverse order of removal instructions.

upwards from transaxle pulley by deflecting belt keep-

IDLER

ers.

PULLEYS

• Remove belt from center span keeper and pull belt away

 

 

from tractor.

 

BELT INSTALLATION -

 

• Carefully work new belt down between transaxle belt

 

keepers and onto the input pulley.

 

• Slide belt into the center span keeper.

 

• Pull belt toward front of tractor and roll around the top

MANDREL

groove of engine pulley.

PULLEYS

• Install belt through stationary idler and clutching idler.

 

• Make sure belt is in all pulley grooves and inside all belt

 

guides and keepers.

FIG. 20

• Install mower (See “TO INSTALL MOWER” in this

TO ADJUST BRAKE (See Fig. 21)

section of manual).

 

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING BRAKE

1-1/2"

"ENGAGED"

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

FIG. 22

NUT "A"

JAM NUT

OPERATING

ARM

FIG. 21

20

Image 20
Contents PR17542STC Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Safe Operation Practices for Ride-On MowersTable of Contents Unassembled Hardware Steering WheelSeat Keys Slope SheetAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To SET UP Your Mower for Mulching To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mulching Mowing Tips Mowing TipsTo Start Engine See Fig General Recommendations Lubrication Chart Service DatesCustomer Responsibilities Before Each USETractor Engine Cleaning Engine OIL FilterMuffler Spark PlugsTo Remove Mower see FIG Service and AdjustmentsTo Install Mower see FIG To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTransaxle Gear Shift Lever Neutral Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWhen operator leaves Schematic Tractor - Model Number PR17542STC, Product Number 954 56Electrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Repair Parts Steering Assembly Adaptor Wheel Strg Seat Assembly Decals Wheels and TiresEngine 170771 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Limited Warranty Policy Fold Along This Dotted Line Degree Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

PR17542STC specifications

The Poulan PR17542STC is a robust and efficient riding lawn mower designed to provide superior lawn care for homeowners with medium to large-sized yards. Known for its durability and performance, this model combines modern technology with user-friendly features, making it an excellent choice for both novice and experienced gardeners.

One of the standout characteristics of the PR17542STC is its powerful 17.5 HP Briggs & Stratton engine. This reliable engine ensures ample power to tackle various lawn types and terrains, providing a smooth and consistent mowing experience. Its automatic transmission allows for easy maneuverability, enabling the user to change speeds without the hassle of shifting gears manually. This feature is particularly beneficial when navigating around obstacles and tight corners.

The mower features a 42-inch cutting deck, which is optimal for achieving a clean and even cut across your lawn. The cutting deck comes equipped with three separate blades, allowing for efficient grass distribution and reducing the need for extensive clean-up afterward. Additionally, the cutting height can be easily adjusted to meet the specific needs of your lawn, offering a customizable mowing experience.

Comfort is prioritized in the design of the PR17542STC, as illustrated by its cushioned seat and ergonomic steering wheel. This ensures that users can enjoy longer mowing sessions without discomfort. The mower also includes a convenient dashboard that displays essential information, such as fuel levels and speed, keeping the user informed at all times.

Technologically advanced features such as a mulching kit are available, allowing homeowners to recycle grass clippings into nutrient-rich mulch. This not only promotes a healthier lawn but also helps reduce waste. Furthermore, the mower’s easy-to-access maintenance points make routine upkeep simple and straightforward, ensuring it remains in excellent condition for many seasons.

Overall, the Poulan PR17542STC stands out as a reliable and efficient riding lawn mower, thanks to its powerful engine, user-friendly features, and advanced technology. Whether you're maintaining a pristine lawn or managing challenging terrain, this mower offers the performance and comfort necessary to achieve your gardening goals, making it a valuable addition to any homeowner's lawn maintenance arsenal.