Poulan 173282, PPR1742STC owner manual Install Seat See Fig

Page 7

ASSEMBLY

SEAT PAN

LABEL

BATTERY

BOX DOOR

TERMINAL

TERMINAL

FIG. 2

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard packing. Remove the carboard packing and discard.

Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

Assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

ADJUSTMENT

FLAT WASHER

KNOB

 

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Opera- tion section, page 10, for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been completed.

Check engine oil level and fill fuel tank with gasoline.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

Place gear shift lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine. After engine has started, move throttle control to idle position.

Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

Slowly release clutch/brake pedal and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Image 7
Contents PPR1742STC Safe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Customer Responsibilities Product SpecificationsContents of Hardware Pack Unpack Carton Tools Required for AssemblyHOW to SET UP Your Tractor Before Removing Tractor from SkidInstall Seat See Fig Check Deck Levelness To SET UP Your Mower for MulchingTo Convert to Bagging or Discharging Check Tire PressureLight Battery Reverse Forward FastSee Safety Rules Section Engine on Engine OFF OIL Pressure Lights onKnow Your Tractor HOW to USE Your Tractor ADD Gasoline Before Starting the EngineTo Transport Towing Carts and Other AttachmentsTo Start Engine See Fig Mowing TipsMulching Mowing Tips General Recommendations Lubrication ChartBefore Each USE Tractor Lubrication EngineBelts Transaxle CoolingSpark Plugs CleaningAIR Filter See Fig MufflerTo Remove Mower See Fig To Install MowerFRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Motion Drive Belt See Fig To Adjust Brake See FigBelt Installation To Replace Mower Blade Drive Belt See FigFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigInterlocks and Relays Replacing Battery See FigsTo Remove Hood and Grill Assembly See Fig To Replace Headlight BulbFinal Setting To Adjust Throttle Control Cable See FigTo Adjust Carburetor See Fig Preliminary SettingCylinders OtherFuel System Engine OILTroubleshooting Points OFF Tractor - Model Number PPR1742STC Schematic2122 Electrical170243 163968140401 170217Chassis and Enclosures 172108 169830169061 168337X012 Dash P/LDrive 169592 14243273800500 169372X428Steering Assembly 160367 121472X Wheel Steering169832 16351817000616 Seat Assembly71110616 171852173282 DecalsWheels and Tires 170856Engine 73510400 148875 Control Th/ch 36 Lh Flag169837 17060620Mower Deck 73800600 7476061672140506 132274Mower Lift Tractor Model Number PPR1742STC167253 159460 Wire Asm Inner/Sprg W/plunger LT169484 Page Limited Warranty Service Sighting Guide Suggested Guide for Sighting Slopes for Safe OperationParts and Service

PPR1742STC, 173282 specifications

The Poulan 173282, PPR1742STC is a standout model in the world of lawn and garden equipment, designed to deliver exceptional performance and ease of use. As a versatile mower, it caters to both residential and commercial landscaping needs, making it a popular choice among homeowners and professional landscapers alike.

One of the main features of the Poulan 173282 is its powerful engine. Equipped with a reliable four-stroke engine, it provides ample power to tackle various types of grass and terrain. The engine is designed for fuel efficiency, thereby reducing operational costs while ensuring consistent performance. The integrated starting system offers easy ignition, saving time and effort for the user.

The cutting deck of the PPR1742STC is another highlight. Its 42-inch deck allows for a wide cutting path, enabling faster mowing times and less overlapping. The deck is constructed from durable materials that withstand the rigors of outdoor use, ensuring longevity. Furthermore, the adjustable cutting height feature allows users to customize the grass length according to their preferences, giving them the flexibility to achieve the perfect lawn.

Technologically, the Poulan 173282 incorporates a user-friendly control panel that simplifies operation. With easy-to-reach controls for speed adjustment and blade engagement, users can navigate various mowing conditions with ease. The model also features ergonomic handles designed for comfort, reducing fatigue during extended use.

Safety is a priority in the design of the PPR1742STC. It includes features such as a safety switch that prevents accidental starts and guards that protect users from debris. These safety elements are crucial for ensuring a secure mowing experience.

In terms of versatility, this mower is compatible with various attachments. It can be equipped with baggers, mulchers, and other accessories, allowing users to customize their mowing experience based on specific needs. This adaptability makes it a valuable tool for tackling diverse landscaping tasks.

Overall, the Poulan 173282, PPR1742STC combines robust performance, innovative technology, and user-oriented features. Its durable construction, powerful engine, and safety mechanisms make it a reliable choice for anyone looking to maintain their lawn effectively. Whether for personal use or professional landscaping, this mower stands out as a durable and efficient solution for grass management.