Tractor, Brake Operation, Tires, Blade Care

CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 9)

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

	TRAILING	MANDREL
	TRAILING	ASSEMBLY
	EDGE UP	ASSEMBLY
	EDGE UP
		CENTER
		HOLE

LOCK WASHER

STAR

BLADE

FLAT WASHER

HEX BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 9

TO SHARPEN BLADE (See Fig. 10)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT	BLADE
OR PIN

FIG. 10

PO14542E specifications

The Poulan PO14542E is a versatile and efficient lawn mower designed to deliver exceptional performance for homeowners who prioritize quality and reliability. With its powerful engine and user-friendly features, this mower is the ideal choice for maintaining a pristine lawn, no matter the size or terrain.

One of the standout features of the PO14542E is its robust 14.5 horsepower engine, which provides ample power for tackling dense grass and uneven terrains. This engine is designed for optimal fuel efficiency, reducing emissions while ensuring that you can complete your mowing tasks without frequent stops for refueling. The easy-starting system allows users to get the machine running quickly, making lawn care hassle-free.

The cutting deck of the Poulan PO14542E measures 42 inches, allowing for an efficient cutting width that strikes a balance between maneuverability and effective grass coverage. The sturdy deck is constructed from durable materials designed to withstand the rigors of regular use, ensuring longevity and reliability. Additionally, the mower features adjustable cutting heights, giving users the flexibility to choose the ideal length for their lawn.

Comfort and ease of use are emphasized in the design of the PO14542E. The mower is equipped with a comfortable seat, ergonomic controls, and easy-to-handle steering, making it suitable for extended mowing sessions. The adjustable speed settings allow users to match their mowing pace to the conditions of their lawn, whether tackling thick grass or navigating around obstacles.

One of the innovative technologies incorporated into the Poulan PO14542E is the automatic lubrication system, which ensures that the engine components remain well-lubricated, reducing wear and enhancing overall performance. This feature means less maintenance for users, allowing them to spend more time enjoying their lawn rather than working on their mower.

Overall, the Poulan PO14542E combines power, efficiency, and comfort, making it a top choice for those looking to maintain their lawns with ease. With its reliable engine, adjustable features, and user-friendly design, this mower stands out as a dependable tool for lawn care enthusiasts and homeowners alike. Whether you have a small backyard or a sprawling garden, the PO14542E can help you achieve a well-manicured landscape with minimal effort.