Poulan PO14542E manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

Page 16

CUSTOMER RESPONSIBILITIES

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

•Open battery box door.

•Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

•Rinse the battery with plain water and dry.

•Clean terminals and battery cable ends with wire brush until bright.

•Coat terminals with grease or petroleum jelly.

•Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustments section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

FIG. 11

 

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.)

 

improve starting in cold weather, these multi-viscosity oils

 

will result in increased oil consumption when used above

 

32°F. Check your engine oil level more frequently to avoid

 

possible engine damage from running low on oil.

 

Change the oil after every 25 hours of operation or at least

 

once a year if the tractor is not used for 25 hours in one year.

 

Check the crankcase oil level before starting the engine and

 

after each eight (8) hours of operation. Tighten oil fill cap/

 

dipstick securely each time you check the oil level.

16

 

TO CHANGE ENGINE OIL (See Fig. 11 and 12)

Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove yellow cap from end of drain valve and install the drain tube onto the fitting.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

 

DRAIN

YELLOW

TUBE

CAP

 

 

FIG.12

•Unlock drain valve by pushing inward and turning coun- terclockwise.

•To open, pull out on the drain valve.

•After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

•Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. PO14542E Safety Rules IV. ServiceGeneral Operation II. Slope OperationTable of Contents Product Specifications Customer ResponsibilitiesUnassembled Parts Steering Wheel SeatKeys Slope SheetAssembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsADD Gasoline Mowing TipsTo Start Engine See Fig Lubrication Chart Service DatesCustomer Responsibilities General RecommendationsTractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen To Service PRE-CLEANERTo Service Cartridge Engine Cooling Fins See FigCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Install Mower see FIG Service and AdjustmentsTo Remove Mower see FIG To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO14542EElectrical 4529KEY Part Description Chassis and Enclosures Repair Parts Drive Transaxle Peerless Model 206-545C Steering Assembly KEY Part NO. NO. Description Engine KEY Part Description Seat Assembly Decals Wheels & TiresMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck Repair Parts Service Notes Limited Warranty C U M SEH Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

PO14542E specifications

The Poulan PO14542E is a versatile and efficient lawn mower designed to deliver exceptional performance for homeowners who prioritize quality and reliability. With its powerful engine and user-friendly features, this mower is the ideal choice for maintaining a pristine lawn, no matter the size or terrain.

One of the standout features of the PO14542E is its robust 14.5 horsepower engine, which provides ample power for tackling dense grass and uneven terrains. This engine is designed for optimal fuel efficiency, reducing emissions while ensuring that you can complete your mowing tasks without frequent stops for refueling. The easy-starting system allows users to get the machine running quickly, making lawn care hassle-free.

The cutting deck of the Poulan PO14542E measures 42 inches, allowing for an efficient cutting width that strikes a balance between maneuverability and effective grass coverage. The sturdy deck is constructed from durable materials designed to withstand the rigors of regular use, ensuring longevity and reliability. Additionally, the mower features adjustable cutting heights, giving users the flexibility to choose the ideal length for their lawn.

Comfort and ease of use are emphasized in the design of the PO14542E. The mower is equipped with a comfortable seat, ergonomic controls, and easy-to-handle steering, making it suitable for extended mowing sessions. The adjustable speed settings allow users to match their mowing pace to the conditions of their lawn, whether tackling thick grass or navigating around obstacles.

One of the innovative technologies incorporated into the Poulan PO14542E is the automatic lubrication system, which ensures that the engine components remain well-lubricated, reducing wear and enhancing overall performance. This feature means less maintenance for users, allowing them to spend more time enjoying their lawn rather than working on their mower.

Overall, the Poulan PO14542E combines power, efficiency, and comfort, making it a top choice for those looking to maintain their lawns with ease. With its reliable engine, adjustable features, and user-friendly design, this mower stands out as a dependable tool for lawn care enthusiasts and homeowners alike. Whether you have a small backyard or a sprawling garden, the PO14542E can help you achieve a well-manicured landscape with minimal effort.
Top Page Image Contents