Poulan PD25PH48STA To Attach Nose Roller See Fig, Install Mower and Drive Belt See Figs

Page 8

ASSEMBLY

TO ATTACH NOSE ROLLER (See Fig. 5)

•Assemble brackets "A" and "B" to the inside of mower mounting brackets as shown. Tighten securely.

NOTE: Be sure bracket tabs are positioned in tab holes in mower brackets.

•Position nose roller between brackets and install rod and retainer spring.

LOCK

HEX

BOLT

NUT

ROD

TAB

"B"

BRACKET

HOLE

 

"A"

 

BRACKET

 

02612

 

 

NOSE

RETAINER SPRING

ROLLER

 

FIG. 5

INSTALL MOWER AND DRIVE BELT (See Figs. 6 and 7)

Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage park- ing brake.

•Cut and remove ties securing anti-sway bar and belts. Swing anti-sway bar to left side of mower deck.

•Slide mower under tractor with deflector shield to right side of tractor.

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•If equipped, turn height adjustment knob counter- clockwise until it stops.

•Lower mower linkage with attachment lift control.

•Be sure belt tension rod is in disengaged position. Install belt into electric clutch pulley groove.

•Place the suspension arms on outward pointing deck pins. Retain with double loop retainer spring with loops up as shown.

•Install front plate assembly to tractor suspension brackets and retain with single loop retainer springs as shown.

•Position front plate assembly between front mower brackets. Raise deck and plate assembly to align holes and insert flanged pins. Secure pins with double loop retainer springs between the plate assembly and mower brackets.

NOTE: To assist in locating hole in flanged pin, the hole in pin is inline with notch on head of pin. If necessary, move mower side-to-side to give space between plate and mower brackets.

IMPORTANT: Check belt for proper routing in all mower pulley grooves. Engage belt tension rod by pushing rod into locking bracket.

•Engage belt tension rod by pushing rod into locking bracket.

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Connect anti-sway bar to chassis bracket under left footrest and retain with double loop retainer spring.

•If equipped, turn height adjustment knob clockwise to remove slack from mower suspension.

•Raise deck to highest position.

•Adjust gauge wheels before operating mower as shown in the Operation section of this manual.

 

LOCK BRACKET

ELECTRIC CLUTCH

FRONT SUSPENSION

BELT TENSION ROD

 

 

PULLEY

 

BRACKETS

 

 

 

 

FRONT

 

 

 

 

(DISENGAGED POSITION)

 

MOWER

DOUBLE LOOP

 

FRONT PLATE

 

 

 

BRACKET

RETAINER SPRING

CHASSIS

 

 

ASSEMBLY

 

 

 

 

 

 

BRACKET

 

 

 

 

 

 

 

GAUGE WHEEL

 

 

 

 

FLANGED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN

 

SINGLE LOOP

 

 

 

 

 

 

 

RETAINER SPRINGS

DOUBLE LOOP

 

 

 

 

 

 

RETAINER SPRING

 

 

 

 

 

 

 

ANTI-SWAY

 

 

 

 

 

USE PLIERS FOR

BAR

 

 

 

 

 

 

 

 

 

 

 

 

 

RETAINER SPRINGS

 

SUSPENSION ARMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DOUBLE LOOP RETAINER

 

 

 

 

 

LOOP UP

 

SPRING (OUTWARD

02510

 

 

DEFLECTOR SHIELD

 

POINTING DECK PINS)

 

 

FIG. 6

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PD25PH48STA Safety Rules Safety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs To Attach Nose Roller See FigCheck Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Towing Carts and Other ATTACH- MentsCheck Engine OIL Level ADD GasolineAutomatic Transmission Warm UP Purge TransmissionMowing Tips Maintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning Clean AIR INTAKE/COOLING AreasMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Drive BeltTo Replace Mower Blade Drive Belt See Fig To Check BrakeTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Replace Headlight Bulb Interlocks and RelaysTo Remove Hood and Grill Assembly See Fig To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model Number PD25PH48STA, Product Number 954 56Electrical KEY Part Description Chassis and Enclosures Repair Parts Tractor Model Number PD25PH48STA, Product Number 954 56 Drive KEY Part NO. NO. DescriptionSteering Assembly 180656 Wheel Steering Engine KEY Part NO. NO. Description Seat Assembly Decals Wheels & TiresMower Lift KEY Part NO. NO. Description Mower Deck KEY Part Description Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

PD25PH48STA specifications

The Poulan PD25PH48STA is a robust and efficient riding lawn mower designed to provide an exceptional mowing experience for homeowners with large yards. This model strikes the perfect balance between power, performance, and user-friendly features, making it a favored choice for both novices and seasoned lawn care enthusiasts.

One of the standout features of the PD25PH48STA is its powerful 25 horsepower Briggs & Stratton engine. This reliable engine ensures that the mower can handle tough grass and varied terrain without compromising performance. The engine is known for its durability and low maintenance requirements, allowing users to focus more on mowing and less on upkeep.

The 48-inch cutting deck of the PD25PH48STA offers a wide cutting path, allowing for efficient mowing of large areas. The deck is constructed with high-quality materials that ensure longevity and resistance to wear. The adjustable cutting height feature allows users to customize the grass height according to their preferences, providing flexibility for different mowing conditions.

Another notable aspect of the Poulan PD25PH48STA is its hydrostatic transmission system. This technology allows for smooth and effortless operation, enabling users to easily adjust their speed without the need for shifting gears. This ease of use is particularly beneficial when navigating around obstacles or tackling sloped terrains.

In terms of comfort, the PD25PH48STA is equipped with a roomy and comfortable seat, designed to support prolonged use without discomfort. The intuitive control layout enhances user experience, allowing operators to access necessary functions quickly and efficiently.

The mower is also designed with an innovative cutting system that ensures even grass distribution. Its high-performance blades deliver a clean and consistent cut, promoting a healthier lawn.

For convenience, the PD25PH48STA features a simple to use start mechanism making it reliable in various weather and operational conditions. Its compact design allows for easy maneuverability around flower beds and other landscaping features.

In summary, the Poulan PD25PH48STA is a powerful riding lawn mower that combines robust performance with user-friendly features. With its efficient Briggs & Stratton engine, wide cutting deck, hydrostatic transmission, and emphasis on comfort and easy operation, this mower is an excellent investment for anyone looking to maintain their lawn with ease and precision.
Top Page Image Contents