To Operate Mower

Attachment Clutch Switch “Engaged” Position

Attachemnt Lift Lever

High Position

Low

Position

“Disengaged” Position

02661

Deﬂector

TO OPERATE ON HILLS Shield WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual.

• Choose the slowest speed before start- ing up or down hills.

• Avoid stopping or changing speed on hills.

• If slowing is necessary, move throttle control lever to slower position.

• If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

• Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

• To restart movement, slowly release parking brake and clutch/brake pedal.

• Make all turns slowly.

TO TRANSPORT

• Raise attachment lift to highest position with attachment lift control.

• When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

• Do not push or tow tractor at more than ﬁve (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deﬂector shield in place.

TO STOP MOWER BLADES - disengage attachment clutch control.

•The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the ﬁrst cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Be sure tractor is on a ﬂat level surface.

1.Lower mower and adjust mower to de- sired cutting height(See “TO ADJUST MOWER CUTTING HEIGHT” in this section of manual).

2.Remove retainer spring and clevis pin which secure each gauge wheel bar.

3.Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pin. Gauge wheels should be slightly off the ground.

4.Replace retainer spring into clevis pin.

5.Be sure all gauge wheels are in the same setting.

IMPORTANT: Be sure to readjust gauge wheels if you change the cutting height of the mower deck.

Retainer spring

019	77

Clevis

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at-

tachment clutch control.

CO18542STA specifications

The Poulan CO18542STA is a robust and efficient lawn mower designed for homeowners seeking a reliable solution for their lawn care needs. This model stands out due to its combination of power, ease of use, and advanced features, making it suitable for various lawn sizes and terrains.

At the heart of the Poulan CO18542STA is a high-performance engine, which provides ample power for cutting through dense grass and challenging conditions. The engine is engineered for durability and efficiency, allowing users to tackle larger areas without frequent refueling. This model features a wide cutting deck measuring 18 inches, which means less time spent mowing and more time enjoying your outdoor space. The cutting height can be easily adjusted, allowing users to customize their lawn care routine according to the season and grass type.

One of the key technologies embedded in this mower is its innovative cutting system. The CO18542STA is equipped with a dual-blade design, which enhances cutting performance and improves grass clippings discharge. This system ensures a clean cut, promoting healthy grass growth and a visually appealing lawn. Additionally, the mower's lightweight construction allows for enhanced maneuverability, ensuring it can navigate around obstacles and tight corners with ease.

The Poulan CO18542STA also emphasizes user comfort and convenience. Its ergonomic handles are designed for optimal comfort during long mowing sessions, reducing fatigue and promoting ease of operation. The mower includes a convenient starting system that allows for quick and easy ignition, minimizing downtime between tasks.

Maintenance is straightforward with the Poulan CO18542STA, thanks to its easy-access engine components and removable cutting deck. This feature enables users to perform routine maintenance tasks without hassle, ensuring the mower remains in peak operating condition.

For those seeking an environmentally friendly option, the Poulan CO18542STA runs on clean-burning, efficient fuel technology. This reduces emissions and aligns with modern sustainability practices, making it a responsible choice for eco-conscious homeowners.

Overall, the Poulan CO18542STA offers an impressive blend of power, technology, and user-focused features. Whether you have a small garden or a more extensive landscape, this mower is designed to deliver reliable performance and ease of use, ensuring your lawn stays healthy and well-maintained year-round.