Poulan CO18542STA manual Install Mulcher Plate, If previously removed

Page 9

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan

 

Shoulder

466

Bolt

Flat Washer

02464

Adjustment Knob

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

WARNING: Before starting, read, un- derstand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of

mower deck.

CAUTION: Do not remove deflector shield from mower.

1. Press lift lever plunger and raise

attachment lift lever to its highest po-

sition.

02114

Deflector Shield

2.

Release parking brake by depressing

 

clutch/brake pedal.

3.

Place gearshift lever in neutral (N)

 

position.

4.

Roll tractor forward off skid.

5.

Remove banding holding deflector

 

shield up against tractor.

Mulcher Plate

Latch

Hooks

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model NO. CO18542STA Warranty Table of ContentsSafety Rules General OperationII. Slope Operation IV. Service III. ChildrenDo not Safety Rules Product Specifications Customer ResponsibilitiesAPI-SG-SL Unassembled Parts Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid If previously removed Install Mulcher PlateReposition Right Rear Gauge Wheel To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower To Start Engine Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelMowing Tips Maintenance General RecommendationsBefore Each USE Tractor Engine Cleaning Service and AdjustmentsTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentTo Check and Adjust Brake To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt Transaxle Gear Shift Lever NEU- Tral Adjustment To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

CO18542STA specifications

The Poulan CO18542STA is a robust and efficient lawn mower designed for homeowners seeking a reliable solution for their lawn care needs. This model stands out due to its combination of power, ease of use, and advanced features, making it suitable for various lawn sizes and terrains.

At the heart of the Poulan CO18542STA is a high-performance engine, which provides ample power for cutting through dense grass and challenging conditions. The engine is engineered for durability and efficiency, allowing users to tackle larger areas without frequent refueling. This model features a wide cutting deck measuring 18 inches, which means less time spent mowing and more time enjoying your outdoor space. The cutting height can be easily adjusted, allowing users to customize their lawn care routine according to the season and grass type.

One of the key technologies embedded in this mower is its innovative cutting system. The CO18542STA is equipped with a dual-blade design, which enhances cutting performance and improves grass clippings discharge. This system ensures a clean cut, promoting healthy grass growth and a visually appealing lawn. Additionally, the mower's lightweight construction allows for enhanced maneuverability, ensuring it can navigate around obstacles and tight corners with ease.

The Poulan CO18542STA also emphasizes user comfort and convenience. Its ergonomic handles are designed for optimal comfort during long mowing sessions, reducing fatigue and promoting ease of operation. The mower includes a convenient starting system that allows for quick and easy ignition, minimizing downtime between tasks.

Maintenance is straightforward with the Poulan CO18542STA, thanks to its easy-access engine components and removable cutting deck. This feature enables users to perform routine maintenance tasks without hassle, ensuring the mower remains in peak operating condition.

For those seeking an environmentally friendly option, the Poulan CO18542STA runs on clean-burning, efficient fuel technology. This reduces emissions and aligns with modern sustainability practices, making it a responsible choice for eco-conscious homeowners.

Overall, the Poulan CO18542STA offers an impressive blend of power, technology, and user-focused features. Whether you have a small garden or a more extensive landscape, this mower is designed to deliver reliable performance and ease of use, ensuring your lawn stays healthy and well-maintained year-round.
Top Page Image Contents