5. ERASE TRANSMITTERS

To erase unwanted remote control(s) from the memory of Smart ButtonTM GB-318, first erase all remote controls, then learn the one(s) you would like to keep, follow the steps below:

1.Press and hold the learn button for approximate 10 seconds.

2.The LED will flash rapidly after 10 seconds to indicate all the pro- grammed remote controls have been erased. You may now release the learn button.

3.You have erased all the remote controls programmed to the Smart ButtonTM GB-318.

6.TROUBLE SHOOTING

Q:What can I do if the door opener does not react after I press the button on the transmitter ?

A:- Ensure when the button on the transmitter is pressed, the red LED on the transmitter comes on. Otherwise, check if the battery is inserted properly.

-Make sure the button on the transmitter is pressed.

-Ensure the wires that were previously connected to the wall mounted door control are not loose.

-Ensure the transmitter has been programmed to the receiver. Refer to section 3 for how to program a transmitter to the receiver.

7. BATTERY

12volt alkaline battery (size 23A) included.

8. VISOR CLIP INSTALLATION

11. FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

12. WARRANTY

If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.

13. CUSTOMER SERVICE

If you would like to

-find out the up-to-date specifications

-know more about features and applications

-download documents, i.e. user’s instructions

-order Skylink products

or if you have difficulty getting products to work, please:

1.visit our FAQ section at www.skylinkhome.com, or

2.email us at support@skylinkhome.com, or

3.call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax (800) 286-1320

9. ADDITIONAL TRANSMITTER

You can add up to 10 additional transmitters to control the same receiver. Skylink® offers Keychain Transmitters and Keypad Transmitters to work with your receiver. For more information, please visit our website at www.skylinkhome.com or contact us.

10. WARNING

DO NOT let children use the garage door transmitter without adult supervision. Children can injure themselves or others by the garage door.

CUSTOMER SERVICE

17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Email:support@skylinkhome.com http://www.skylinkhome.com

P/N. 101Z768-002

US Patent. D377458

Patents pending

®are registered trademarks of their respective corporations ©2010 SKYLINK GROUP

Page 2
Image 2
SkyLink GBRV manual Erase Transmitters, Trouble Shooting, Battery, Visor Clip Installation, Warranty, Customer Service

GBRV specifications

SkyLink GBRV is an innovative vehicle that represents the pinnacle of modern engineering and technological integration in the realm of personal and commercial transportation. This next-generation vehicle stands for "Ground-Breaking Recreation Vehicle," and it combines unparalleled versatility, cutting-edge features, and sustainable technologies.

One of the standout characteristics of the SkyLink GBRV is its hybrid powertrain. It seamlessly blends traditional fuel sources with electric power, ensuring optimal efficiency while minimizing emissions. This dual-engine system allows the vehicle to switch between modes, enabling it to travel longer distances without sacrificing performance. The electric component provides instant torque, making the GBRV exceptionally responsive and capable of handling various terrains, from urban environments to off-road adventures.

The interior of the SkyLink GBRV is designed with user comfort and convenience at the forefront. Equipped with an intelligent infotainment system, passengers can access navigation, entertainment, and vehicle diagnostics with ease. The system is powered by artificial intelligence, providing personalized recommendations based on user preferences. Additionally, the spacious cabin incorporates modular seating arrangements, allowing users to reconfigure the space as needed for leisure or cargo requirements.

Safety is a significant focus in the design of the GBRV, featuring a robust suite of advanced driver-assistance systems (ADAS). These include adaptive cruise control, lane-keeping assist, and collision detection Systems designed to enhance the driving experience while ensuring passenger safety. The integration of a 360-degree camera system offers full coverage around the vehicle, making parking and maneuvering in tight spaces a breeze.

Moreover, the SkyLink GBRV is built with sustainability in mind. The materials used in its construction are eco-friendly and recyclable, reducing the vehicle's overall carbon footprint. The incorporation of solar panels on the roof contributes to energy efficiency, allowing the vehicle to harness renewable energy as it travels.

In summary, the SkyLink GBRV is more than just a vehicle; it’s a forward-thinking solution that harmonizes technology, comfort, safety, and sustainability. With its hybrid powertrain, intelligent infotainment system, advanced safety features, and eco-friendly materials, the GBRV is poised to set a new standard in the realm of recreational vehicles and beyond. Whether for everyday commuting or adventurous excursions, the SkyLink GBRV offers a transformative experience that adapts to the needs of its users while prioritizing the health of our planet.