Poulan PD24PH48ST To Replace Mower Blade Drive Belt See Fig, To Check and Adjust Brake See Fig

Page 22

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 22)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work belt around both mandrel pulleys and idler pul- leys.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower (See "To Install Mower" in this section of manual).

IDLER

PULLEYS

MANDREL

PULLEY

MANDREL

PULLEY

FIG. 22

TO CHECK AND ADJUST BRAKE (See Fig. 23)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

•Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress brake pedal all the way down and engage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

•Engage transmission by placing freewheel control in “transmission engaged” position.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-9/16"

NUT “A”

JAM NUT

OPERATING

ARM

02537

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUSTMENT IS NECESSARY CONTACT YOUR NEAREST AUTHORIZED SER- VICE CENTER/DEPARTMENT

FIG. 23

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PD24PH48ST General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Seat Unassembled PartsSteering Wheel Slope SheetTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig Check Mower Levelness To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigUsing the Reverse Operation System Reverse Operation System ROSTowing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelPurge Transmission To Start Engine See FigAutomatic Transmission Warm UP Mowing Tips Mulching Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Before Each USEBlade Removal See Fig TractorTo Sharpen Blade See Fig Engine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing Recheck side-to-side adjustmentTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Fig To Remove CABLES, Reverse OrderTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

PD24PH48ST specifications

The Poulan PD24PH48ST is a robust and versatile lawn tractor designed to tackle a variety of outdoor tasks with ease and efficiency. This model stands out for its powerful performance, innovative features, and user-friendly design, making it an excellent choice for homeowners looking to maintain their lawns and gardens without hassle.

One of the key features of the Poulan PD24PH48ST is its impressive 24 horsepower engine. This powerful engine delivers the necessary torque and speed to handle even the toughest mowing conditions. The tractor is equipped with a reliable hydrostatic transmission system, which allows for effortless speed control and smooth operation. With no gears to shift, users can simply press the pedal to accelerate or decelerate, making it easy to navigate through tight spaces and maneuver around obstacles.

The Poulan PD24PH48ST boasts a 48-inch cutting deck, which allows for efficient mowing over larger areas. The cutting deck features adjustable cutting heights, enabling users to select the desired grass length for their specific lawn type. This flexibility ensures an even cut and promotes healthy grass growth. Additionally, the deck is designed for easy clean-up, which is essential for maintaining optimal performance over time.

Another notable characteristic of the PD24PH48ST is its comfort-oriented design. The tractor is fitted with a high-back seat, providing essential lumbar support for extended periods of mowing. The easy-to-use dashboard and controls allow operators to adjust settings and monitor performance without taking their eyes off the task at hand. The tractor also features a tight turning radius, which makes it easy to maneuver around flower beds, trees, and other landscaping elements.

The Poulan PD24PH48ST incorporates several advanced technologies to enhance its functionality. The tractor features a durable steel frame for increased stability and lifetime performance. Its rugged tires provide excellent traction on various terrains, allowing users to tackle both flat and hilly landscapes with confidence. The tractor is also compatible with a range of attachments, including snow blowers, baggers, and plows, enhancing its versatility throughout the year.

In summary, the Poulan PD24PH48ST stands out as a reliable and efficient lawn tractor equipped with a powerful engine, a versatile cutting deck, and user-friendly features. Its combination of technology and comfort makes lawn care a breeze, ensuring homeowners can achieve the perfect lawn with minimal effort. This tractor is an excellent investment for anyone serious about maintaining their outdoor spaces.
Top Page Image Contents