Poulan PD24PH48ST To Convert to Bagging or Discharging, Check Tire Pressure, Check Brake System

Page 8

ASSEMBLY

INSTALL MULCHER PLATE (See Fig. 4) (If previously removed)

•Raise and hold deflector shield in upright position.

•Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

•Hook front latch into hole on front of mower deck.

•Hook rear latch into hole on back of mower deck.

CAUTION:Do not remove deflector shield from mower.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulcher blades are designed for discharging and bagging also.

DEFLECTOR

MULCHER

SHIELD

PLATE

 

LATCH

HOOKS

FIG. 4

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK MOWER LEVELNESS

For best cutting results, mower should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion, mower drive, and mower blade drive belts in the Service and Ad- justments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THATYOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before oper- ating your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PD24PH48ST Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Steering WheelSeat Slope SheetAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To Convert to Bagging or Discharging Check Tire PressureCheck Mower Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROSBefore Starting the Engine To Operate on HillsTowing Carts and Other ATTACH- Ments Check Engine OIL LevelAutomatic Transmission Warm UP To Start Engine See FigPurge Transmission Mowing Tips Mulching Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USETo Sharpen Blade See Fig TractorBlade Removal See Fig Engine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Recheck side-to-side adjustmentTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

PD24PH48ST specifications

The Poulan PD24PH48ST is a robust and versatile lawn tractor designed to tackle a variety of outdoor tasks with ease and efficiency. This model stands out for its powerful performance, innovative features, and user-friendly design, making it an excellent choice for homeowners looking to maintain their lawns and gardens without hassle.

One of the key features of the Poulan PD24PH48ST is its impressive 24 horsepower engine. This powerful engine delivers the necessary torque and speed to handle even the toughest mowing conditions. The tractor is equipped with a reliable hydrostatic transmission system, which allows for effortless speed control and smooth operation. With no gears to shift, users can simply press the pedal to accelerate or decelerate, making it easy to navigate through tight spaces and maneuver around obstacles.

The Poulan PD24PH48ST boasts a 48-inch cutting deck, which allows for efficient mowing over larger areas. The cutting deck features adjustable cutting heights, enabling users to select the desired grass length for their specific lawn type. This flexibility ensures an even cut and promotes healthy grass growth. Additionally, the deck is designed for easy clean-up, which is essential for maintaining optimal performance over time.

Another notable characteristic of the PD24PH48ST is its comfort-oriented design. The tractor is fitted with a high-back seat, providing essential lumbar support for extended periods of mowing. The easy-to-use dashboard and controls allow operators to adjust settings and monitor performance without taking their eyes off the task at hand. The tractor also features a tight turning radius, which makes it easy to maneuver around flower beds, trees, and other landscaping elements.

The Poulan PD24PH48ST incorporates several advanced technologies to enhance its functionality. The tractor features a durable steel frame for increased stability and lifetime performance. Its rugged tires provide excellent traction on various terrains, allowing users to tackle both flat and hilly landscapes with confidence. The tractor is also compatible with a range of attachments, including snow blowers, baggers, and plows, enhancing its versatility throughout the year.

In summary, the Poulan PD24PH48ST stands out as a reliable and efficient lawn tractor equipped with a powerful engine, a versatile cutting deck, and user-friendly features. Its combination of technology and comfort makes lawn care a breeze, ensuring homeowners can achieve the perfect lawn with minimal effort. This tractor is an excellent investment for anyone serious about maintaining their outdoor spaces.
Top Page Image Contents