Poulan CO185H42STC manual Install Mulcher Plate If previously removed

Page 9

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan

 

Shoulder

466

Bolt

Flat Washer

02464

Adjustment Knob

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

1. Press lift lever plunger and raise

attachment lift lever to its highest po-

sition.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

WARNING: Before starting, read, un- derstand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

4.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

5.Place motion control lever in neutral

(N)position.

6.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

7.Start the engine. After engine has started, move throttle control to idle position.

8.Release parking brake.

9.Slowly move the motion control lever forward and slowly drive tractor off skid.

10.Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

11.Turn ignition key to "STOP" position. Continue with the instructions that follow.

INSTALL MULCHER PLATE (If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

CAUTION: Do not remove deflector shield from mower.

2.

Release parking brake by depressing

 

clutch/brake pedal.

3.

Place freewheel control in "trans-

02114

Deflector Shield

mission disengaged position" (See “TO

TRANSPORT” in the Operation section

of this manual).

4. Roll tractor forward off skid.

5. Remove banding holding the deflector

shield up against tractor.

Mulcher Plate

Latch

Hooks

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model NO. CO185H42STC Warranty Table of ContentsSafety Rules General OperationII. Slope Operation IV. Service III. ChildrenDo not Safety Rules Product Specifications Customer ResponsibilitiesAPI-SG-SL Unassembled Parts Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid Install Mulcher Plate If previously removed To Convert to Bagging or Discharging ChecklistReposition Right Rear Gauge Wheel Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower To Operate on HillsTo Transport To Start Engine Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelMowing Tips Mulching Mowing TipsAutomatic Transmission Warm UP Maintenance General RecommendationsBefore Each USE Tractor Engine Cleaning Service and AdjustmentsTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentTo Check and Adjust Brake To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt To Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control LE- VER Neutral AdjustmentTo Start Engine with a Weak Battery Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

CO185H42STC specifications

The Poulan CO185H42STC is a robust and versatile lawn tractor that has become a favored choice for homeowners seeking an efficient and reliable grass-cutting machine. With its powerful engine and efficient design, the CO185H42STC is equipped to handle both small and large lawns with ease.

One of the standout features of the Poulan CO185H42STC is its reliable engine. Powered by an 18.5 horsepower Briggs & Stratton engine, this lawn tractor is built for performance. The engine design ensures optimal power delivery, allowing for smooth operation while navigating various terrains. The automatic choke system further enhances user convenience, ensuring that the lawn tractor starts easily in all weather conditions.

The cutting deck of the CO185H42STC spans an impressive 42 inches, which allows users to cover large areas in a shorter amount of time. The deck is constructed using durable materials that can withstand wear and tear, ensuring longevity. The tractor also features an adjustable cutting height, offering six different positions between 1.5 inches to 4 inches, providing flexibility to achieve the desired lawn finish.

A notable technology included in this model is the hydrostatic transmission system. Unlike the traditional gear system, this advanced transmission allows for smooth speed changes without the need for gear shifting, enabling a more enjoyable driving experience. This feature is especially beneficial when navigating around obstacles or when mowing uneven terrain.

Comfort is another key aspect of the Poulan CO185H42STC. The tractor is equipped with a high-back seat that provides excellent support during extended mowing sessions. The ergonomic steering wheel maximizes maneuverability and is designed to minimize operator fatigue, ensuring a comfortable ride.

The CO185H42STC also includes a convenient bagging attachment, which allows for easy collection of clippings, making yard cleanup quick and efficient. Additionally, its rugged construction means it can handle challenging mowing tasks without the risk of damage.

In summary, the Poulan CO185H42STC is a highly capable lawn tractor that combines power, technology, and user-friendly features. Ideal for homeowners looking to maintain a pristine lawn, it stands out with its powerful engine, adjustable cutting deck, hydrostatic transmission, and focus on operator comfort. This lawn tractor offers a perfect blend of performance and convenience, making it a noteworthy addition to any lawn care toolkit.
Top Page Image Contents