Hitachi PJ-LC9 user manual About the filter cover bottom-up use

Page 11
Slowly turn the projector so that the bottom is facing up.

Preparations

About the filter cover bottom-up use

When the projector is installed bottom up, please use the accessory filter cover for bottom-up use. It is higher than usual filter cover, to keep the space for intake ventilation. Please change the filter cover in the following procedure.

ENGLISH

1. Disconnect all the connectors and adapters that were connected to the projector’s ports.

Then slowly turn the projector so that the lens-side is facing up. While the projector is placed lens-side up, hold the projector.

2. Remove the filter cover. Hold the knobs while pulling out it. If the projector was used before, please clean the air filter referring the section “Air filter”. (50)

Tabs

3.

4. Set the filter cover for bottom- up use. Interlocking the tabs, snap the filter cover for bottom- up use into place.

Filter cover’s knob

Filter cover for bottom-up use (with an air filter)

WARNING ►Do not replace the filter cover and/or air filter during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector.

►Do not use the projector with the air filter and the filter cover removed. Do not remove the filter cover and the air filter in a smoky or dusty place. It could result in a fire and/or malfunction to the projector.

CAUTION ►Please be careful for the projector not to fall. While the projector is placed lens-side up, hold the projector.

9

Downloaded from www.Manualslib.com manuals search engine

Image 11
Contents Bedienungsanleitung Benutzerhandbuch ProjectorUser’s Manual Operating Guide Manuel dutilisation Guide dutilisationEspañol Manual de usuario Adicional Français Manuel dutilisation SupplémentaireDeutsch Bedienungsanleitung Zusätzlicher Trademark acknowledgment Thank you for purchasing this projectorOperating Power on/offBefore use PreparationsEasy Menu Multifunctional settingsAbout this manual Projector featuresAbout contents of package Projector Part namesMagnify Remote controlControl buttons Fastening the lens cover About the filter cover bottom-up use Arrangement When put on a table When suspended from the ceilingFor 43 screens For 169 screensAdjusting the projector’s elevator Examples of connection with a VCR/DVD player Connecting your devicesExamples of connection with a computer Text Example of computer signalAbout Plug-and-Play capability Connecting power supply Loading batteries into the remote control Using the remote control STANDBY/ON Turning on the powerTurning off the power Temporarily muting the sound Adjusting the volumeSearching an input signal Selecting an input signalSelecting an aspect ratio For a 169 signalFor a 43 signal Using the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus Correcting the keystone distortions Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen Enter Using the menu functionTo display a menu To choose the target menuTo choose the target item Setup MenuTo close the menu To resetTo operate To return to the previous menuColor DescriptionZoom ModeLanguage MirrorGamma #1 Default  #1 Custom  #2 Default#3 Custom  #3 Default  #2 Custom Picture menuColor Temp High  MiddleCustom  LOW MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image menu For a 169 signalFor a 43 signal For an RGB signalSize PositionFor a component video signal Auto Adjust ExecuteFor a video signal or s-video signal Frame Lock Input menuAuto  Ntsc  PAL  Secam Turn on  Turn OFFNormal  Hinvert  Vinvert  H&VINVERT Setup menuNormal  Whisper Bright  Dark Screen menuMenu Position Start UP Sync is OUT of Range MessageNo Input is Detected Auto OFF Reset  CancelOption menu RGB  S-VIDEO  VideoFAN Speed ServiceAuto Adjust Enable  DisableFilter Message Factory ResetGhost Lamp Type number = DT00707 Case of replacement by yourselfCenter point of claws Tabs Filter cover for bottom-up use Air filterType number = NJ22642 Usual filter coverPosition the air filter and filter cover into place Caring for the lens Caring for the cabinet and remote controlInside of the projector Related messages Horizontal or vertical wavelength of the input signalLamp Temp Regarding the indicator lampsPower Power Lamp Temp If the situation cannot be corrected Phenomena that may easily be taken as machine defectsColor Space setting is not suitable Volume is adjusted to an extremely low levelBrightness is adjusted to an extremely low level Color settings are not correctly adjustedVideo input SpecificationRGB input Communication portDimension diagram Hitachi Europe S.r.l Hitachi Home & Life Solutions, Inc. Middle East OfficeDigital Media Div Hitachi Europe GmbH Munich Office
Related manuals
Manual 62 pages 37.27 Kb

PJ-LC9 specifications

The Hitachi PJ-LC9 is a compact and versatile projector, renowned for its cutting-edge features and outstanding performance. Ideal for business presentations, educational settings, and home theater use, it blends functionality with user-friendly design. With its impressive specifications, the PJ-LC9 caters to the demands of professionals and casual users alike.

One of the key features of the PJ-LC9 is its native resolution of 1024 x 768 pixels (XGA), which ensures crisp and clear images. This resolution is particularly beneficial for presentations containing detailed graphs, charts, and high-quality images. The projector’s brightness of 2500 ANSI lumens makes it suitable for use in a variety of lighting conditions, allowing it to shine in both dim and well-lit environments.

The PJ-LC9 employs advanced LCD technology, which enhances color accuracy and contrast, providing vibrant and lifelike visuals. This technology aids in delivering sharp and vivid images, which is crucial for capturing and maintaining the audience's attention during presentations or watching media content.

Another standout characteristic of the PJ-LC9 is its lightweight design, weighing just 2.5 kg, which makes it highly portable. Its compact form factor allows users to effortlessly transport it between locations, making it an excellent choice for traveling professionals and educators who need to present on-the-go.

Connectivity options are another advantage of the Hitachi PJ-LC9. It comes equipped with multiple input ports, including HDMI, VGA, and USB, enabling users to connect various devices such as laptops, desktops, and media players without hassle. The inclusion of RS-232C serial connection also makes it compatible with computer control for automation and control purposes.

Additionally, the projector features a built-in 1W speaker, providing adequate sound output for small spaces, although external speakers may still be preferable for larger venues. The PJ-LC9 also supports a range of aspect ratios, including 4:3 and 16:9, allowing for flexibility depending on the content being presented.

In terms of maintenance, the PJ-LC9 utilizes a long-lasting lamp that can deliver up to 3000 hours of operation in standard mode, extending to around 5000 hours in eco mode. This longevity ensures reduced maintenance costs and downtime for users.

In summary, the Hitachi PJ-LC9 is a reliable, feature-rich projector that excels in performance and versatility. Its combination of high resolution, brightness, portability, and connectivity options make it a popular choice for professionals and educators seeking an efficient and effective projection solution.