Hitachi PJ-LC9 user manual Using the remote control

30º 30º

approx. 3 meters

Preparations

Using the remote control

The remote control works with the projector’s remote sensor.

• The range of the remote sensor is 3 meters with a 60-degree range (30-degrees to the left and right of the remote sensor).

•Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the

sensor directly, please try to use reflected signal.

•Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.

CAUTION ►Be careful in handling the remote control. Incorrect handling could cause damage or malfunction.

•Do not drop or expose the remote control to physical impact.

•Do not get the remote control wet or place it on wet objects.

•Remove the batteries from the remote control and store them in a safe place if you will not be using the remote control for an extended period.

NOTE • Replace the batteries whenever the remote control starts malfunctioning.

•When strong lights (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp) hit the projector’s remote sensor, the remote control may not function correctly. Adjust the direction of the projector to keep the light from directly hitting the projector’s remote sensor.

18

Downloaded from www.Manualslib.com manuals search engine