Poulan 96042001000, 402557 manual Know Your Tractor, Reverse Operation System ROS on Position

Page 8

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

G

 

 

E

 

 

P

 

D

H

 

 

 

 

K

 

 

L

B

 

J

 

 

N

 

 

F

 

 

C

A

 

 

M

FIG. 3

Our tractors conform to the applicable safety standards of the American National Standards Institute.

(A)ATTACHMENT LIFT LEVER – Used to raise and lower the mower or other attachments mounted to your tractor.

(B)BRAKE PEDAL – Used for braking the tractor and starting the engine.

(C)PARKING BRAKE – Locks clutch/brake pedal into the brake position.

(D)THROTTLE CONTROL – Used to control engine speed.

(E)ATTACHMENT CLUTCH SWITCH – Used to engage the mower blades, or other attachments mounted to your tractor.

(F)IGNITION SWITCH – Used for starting and stopping the engine.

(G)REVERSE OPERATION SYSTEM (ROS) "ON" POSITION

– Allows operation of mower or other powered attachment while in reverse.

(H)LIGHT SWITCH – Turns the headlights on and off.

(J)CRUISE CONTROL LEVER – Used to set forward movement of tractor at desired speed without holding the forward drive pedal.

(K)FORWARD DRIVE PEDAL – Used for forward movement of tractor.

(L)REVERSE DRIVE PEDAL – Used for reverse movement of tractor.

(M)FREEWHEEL CONTROL – Disengages transmission for pushing or slowly towing the tractor with the engine off.

(N)CHOKE CONTROL – Used when starting a cold engine.

(P)SERVICE REMINDER / HOUR METER – Indicates when service is required for the engine and mower.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PB22H48YT Always Wear EYE Protection During OperationSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineTo Operate on Hills Check Engine OIL LevelAutomatic Transmission Warm UP To Start Engine See FigPurge Transmission Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBrake Operation TiresEngine Service and Adjustments CleaningIN-LINE Fuel Filter See Fig Tractor See FigTo Install Mower See Figs To Level Mower Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Engine dies when Limited Warranty Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service

402557, 96042001000 specifications

The Poulan 402557,96042001000 is a versatile and highly efficient chainsaw designed to handle a variety of cutting tasks. Built with both amateur and professional users in mind, this chainsaw combines power, durability, and user-friendly features to deliver a reliable cutting experience.

At the heart of the Poulan 402557 is a robust engine that provides optimal performance, enabling it to tackle everything from light trimming to heavy-duty tree felling. The chainsaw is equipped with a potent two-stroke engine, which emphasizes efficiency without sacrificing power. With its well-designed air intake and exhaust system, the Poulan 402557 ensures reduced emissions, making it an environmentally friendly choice for users who are conscious about their carbon footprint.

One of the standout features of the Poulan 402557,96042001000 is its lightweight construction, which enhances maneuverability and reduces user fatigue during extended use. Despite its lightweight nature, this chainsaw boasts an impressive cutting capacity, thanks to a sharp and durable chain and bar combination. The chainsaw’s 18-inch bar length makes it suitable for a wide range of cutting applications, providing the perfect balance between control and cutting power.

Safety is a paramount concern in chainsaw design, and Poulan has integrated multiple safety features into the 402557 model. It includes a chain brake system that engages instantly in the event of kickback, providing an additional layer of protection for the operator. Furthermore, the chainsaw comes with an anti-vibration system that minimizes user fatigue and enhances comfort during prolonged use.

Ease of maintenance is another important characteristic of the Poulan 402557. The tool-less chain tensioning system allows users to make quick adjustments without the need for additional tools, ensuring the saw is always optimized for performance. Additionally, the transparent fuel tank window lets users easily monitor fuel levels, preventing unexpected interruptions during work.

In terms of versatility, the Poulan 402557 is compatible with various accessories and attachments, making it suitable for different tasks, such as limbing, bucking, and felling.

In summary, the Poulan 402557,96042001000 chainsaw brings together power, safety features, and user-friendliness, making it an excellent choice for both casual users and professionals alike. Its performance, combined with its innovative technologies, ensures it stands out in a competitive market, promising reliability and efficiency for all cutting needs.
Top Page Image Contents