Poulan 96042003401, 413420 Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this manual). After engine has started, move throttle control to idle (slow) position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PB19542LT Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Figs Check Battery See FigCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Using the Reverse Operation SystemReverse Operation System ROS Before Starting the Engine Mowing Tips Maintenance Lubrication ChartTo Sharpen Blade See Fig TractorBlade Removal See Fig Battery EngineBelts Transaxle CoolingCleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Replace Motion Belt Drive See Fig To Replace Mower Drive Belt See FigTo Check Brake Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Start Engine with a Weak Battery See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Tractor - Model Number PB19542LT 96042003401, Product no 42 DecalsWheels and Tires KEY Part DescriptionSchematic FuseElectrical Electrical 197802Chassis 194263 Drawbar Drive Repair Parts Engine Engine Power Rating Information Steering Repair Parts Mower Deck Repair Parts Seat Mower Lift 9098 100Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXLimited Warranty

413420, 96042003401 specifications

The Poulan 96042003401,413420 is a powerful and versatile equipment designed for both homeowners and professionals seeking high-performance tools for lawn care and maintenance. This model stands out in the market for its robust features, advanced technologies, and user-friendly characteristics.

One of the main features of the Poulan 96042003401,413420 is its efficient engine. The equipment is equipped with a reliable gas engine that provides ample power while ensuring smooth operation. This allows users to tackle various tasks such as trimming, edging, and cutting grass with ease. The engine's design emphasizes fuel efficiency, which helps users save on refueling costs over time.

In addition to its powerful engine, the Poulan 96042003401,413420 incorporates a user-friendly starting system. The easy start feature minimizes the effort required to get the machine up and running. This is particularly beneficial for users who may not be experienced with starting gas-powered equipment.

The design of the Poulan 96042003401,413420 places a strong emphasis on ergonomics. The equipment features comfortable grips that minimize strain during extended use, allowing for better maneuverability and control. This thoughtful design helps to reduce fatigue, making it easier for users to complete yard work efficiently.

The cutting technology employed in the Poulan 96042003401,413420 ensures precise and clean cuts. With an adjustable cutting height, users can customize the length of their grass to suit specific preferences or seasonal needs. This versatility makes the equipment suitable for various types of lawns and landscaping designs.

Durability is another key characteristic of the Poulan 96042003401,413420. Constructed from high-quality materials, this equipment is built to withstand the rigors of outdoor use. Users can depend on this model to perform consistently over time, even under challenging conditions.

Maintenance is simplified with this model as well. The Poulan 96042003401,413420 features easy-access components, allowing users to perform routine checks and maintenance tasks without difficulty. This ensures the longevity of the equipment and helps maintain optimal performance.

Overall, the Poulan 96042003401,413420 appeals to a wide range of users due to its powerful engine, ergonomic design, advanced cutting technology, durability, and ease of maintenance. Whether for a small garden or a larger landscape, this equipment is designed to meet various lawn care needs efficiently.
Top Page Image Contents